Environmental Industry Equipment Available In Comoros
-
ShowcaseManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being officially ...
-
ShowcaseManufactured by Regulator-Cetrisabased in SPAIN
The Eddy Current Separator (R-SPM) is able to separate the Non-Ferrous metals from the rest of the materials due to its studied magnetic assembly called the “Inductor Drum”, which rotates at high speed. When a Non-Ferrous Metal crosses the induced magnetic field, it undergoes a repulsion effect and jumps a certain distance ahead of the Foucault drum and away from the rest of the ...
-
ShowcaseManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
ShowcaseManufactured by Harden Machinery Ltd.based in CHINA
Harden QS Series four shaft shredder has intelligent control system for each of shaft, which enables each shaft working with their own shredding and protection actions to increase the shredding frequency and output. Harden QS Series equipped hydraulic and electric motor combine driven system, which remains benefits, high torque and flexible control for main shaft, high efficiency and energy ...
-
ShowcaseManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
ACS holds a patent of a recirculation system to increase the efficiency of cyclones. A mechanical ReCyclone® (ReCyclone® MH) is made up of a high efficiency Hurricane and a particle separator, placed downstream, called the “mechanical recirculator” (please see figure). In 2016, ACS introduced more compact recirculators that can be placed on top of cyclones, exempting the need ...
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
ShowcaseManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Economical Shredder is a double-shaft shredder. Two shafts with special-shaped knives rotate in the shredding chamber. By the action of tearing, shearing, and squeezing caused by knives and counter-plate, material is shredded into smaller pieces, which makes the later treatment or transportation easier and more ...
-
ShowcaseManufactured by Environmental Products & Applications, Inc.based in USA
With over 27 years in the industry, our certified experts know exactly how to eliminate dust on your site. Over the years, we have developed dust control polymers that work effectively & deliver clients maximum value on their investment. Envirotac dust control polymers reduce fugitive dust emission effectively and are ideal for road construction, airfields, helipads in remote sites & ...
-
ShowcaseManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Known for its flexibility, power, and reliability, the process gas chromatograph MAXUM Ed. II stands for state-of-the-art technology for the analysis of both liquid and gaseous samples. It is used in a wide variety of applications primarily in refineries, the oil refining industry, and the chemical ...
-
ShowcaseManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
ShowcaseManufactured by Harp Renewables Limitedbased in IRELAND
The CX1, our smallest bio-digester in the range has the ability to digest up to 1000 litres a week. This digester may be suitable for a school, café or ...
-
ShowcaseManufactured by BPC Instruments ABbased in SWEDEN
Market-leading analytical tool for anaerobic batch fermentation testing. The Automatic Methane Potential Test System (AMPTS®) is the market-leading analytical tool for anaerobic batch fermentation testing. Now on its third generation, AMPTS III is automated and fully integrated for easy access to sampling, analysis, recording and report generation. AMPTS III houses 18 glass reactors for tests ...
-
ShowcaseManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
ShowcaseManufactured by Videology Industrial-Grade Camerasbased in USA
4K IP Board Camera 8 ...
-
ShowcaseManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The acoustic based wave instrument, SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. The acoustic based wave SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. For ...
-
ShowcaseManufactured by Cerex Monitoring Solutions, LLC.based in USA
Optical, remote sensing, sub parts-per-billion (ppb) to percent level gas analyzer. The Cerex Air Sentry was the first open path FTIR to be commercialized and has continued to lead the industry with reliable performance and innovative features. It performs chemical detection and quantification of compounds using open-path, Fourier Transform InfraRed (FTIR) Differential Optical Absorption ...
-
ShowcaseManufactured by IMR Environmental Equipment, Inc.based in USA
The IM 1120 Flue Gas Analyser with its new, innovative HMI concept is controlled via the IM-Smart app and ensures simple operation, handling and evaluation for the user. Free IM-Smart app for remote operation of the IM 1120 with a tablet or smartphone. Various measurement modes with report generating function are available: Flue gas analysis - Differential Temperature - Oxygen Gap - CO Ambient - ...
-
ShowcaseManufactured by Lumex Instrumentsbased in CANADA
The mercury analyzer RA-915M is a unique all-purpose high sensitivity analytical instrument for measuring mercury, especially for the real time detection of mercury vapor in air, mercury detection in water, natural and stack gases, oil and condensate, solid and sediments, foodstuff and so ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you