Heat Exchangers Equipment Available In Costa Rica
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
With the effective recovery of flue gas heat, you can save up to 14% on fuel and, at the same time, reduce emissions. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 14% when using an additional downstream condensing heat ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
A flue gas heat exchanger is part of the standard equipment for energy-optimised and environmentally friendly boiler operation. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 15% when using condensing technology - Intelligent ...
-
Manufactured by Napier-Reid Ltd.based in CANADA
Time tested and trusted for the critical application of heating or cooling digester sludge. Napier-Reid has emerged as a leading manufacturer of sludge heat exchangers for municipal and industrial wastewater treatment ...
-
Manufactured by SiGa-Tech Sp. z o.obased in POLAND
Type WCrr heat exchangers are used to heat sewage sludge, process suspended solids and other media with dry matter less than 8%. We offer heat exchangers with housing, one or multi-sectional. Sludge recuperators are produced with autonomous heating systems and external heat ...
-
Manufactured by SACOMEbased in SPAIN
Annular space heat exchanger with removable inner tube and axial product inlet. Special heat exchanger design for products with fibers or pieces. This tubular heat exchanger is part of our new Sanitary Line of heat exchangers. ...
-
Manufactured by SACOMEbased in SPAIN
Tube in Tube Heat Exchanger with compact design and removable inner tube. This model of tubular heat exchanger is part of our Sanitary Line. ...
-
Manufactured by Micro Cooling Concepts (MC2)based in USA
MC2's compact heat exchangers use laminated foil construction to reduce the core size and weight of Air/Air, Liquid/Liquid and Liquid/Air heat ...
-
Manufactured by SACOMEbased in SPAIN
The S-TF20-I tube in tube sanitary heat exchanger is a tube in tube heat exchanger with non removable inner tube. This double tube heat exchanger is part of our Sanitary Line of shell and tube heat exchangers. ...
-
Manufactured by Claro Incbased in CANADA
Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge energy transfer. Claro modular tube-in-shell heat exchangers, large gap heat exchangers, and Big Bubble Gun Mixers with heating ...
-
Manufactured by DDI Heat Exchangers Inc.based in CANADA
The 3 key advantages of our DDI technology are due to our Patented Technology of Rectangular channeled heat exchangers.It is not the common tube-in-shell technology nor the common Spiral structure of heat exchangers. WE BUY YOUR WASTE. Worlds only direct SLUDGE TO SLUDGE heat ...
-
Manufactured by Geurts Heatexchangers B.V., part of Heilig Groupbased in NETHERLANDS
FLUE GAS HEAT EXCHANGER TRANSFERS EXHAUST GAS HEAT TO ENERGY: Implementing a flue gas heat exchanger to capture exhaust gas and to transfer the heat to different energy consuming part of your installation, saves not only energy but also saves money. Moreover, it is a very sustainable way to ...
-
Manufactured by Elgressy Engineering Services Ltd.based in ISRAEL
The SCP (Scale Crystallization Prevention) is an electrolytic system that prevents scale deposition, reduces and removes chlorine and bacteria from the water, and substantially reduces corrosion rates. The SCP is connected externally to the heat exchange unit and needs no complicated installation procedures or changes to your existing ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Our double-pipe heat exchanger is used to efficiently heat sludge at biogas and waste water treatment plants. Using the counter-flow principle, sludge is heated evenly, and flows back to the process. Our WT is custom-designed, manufactured entirely in stainless ...
-
Manufactured by Equirepsa, S. A.based in SPAIN
EQUIREPSA designs and manufactures condensers, not only as a part of our own vacuum systems, also for a variety of industrial applications. One type of tube and shell heat exchangers are the Surface Condensers. These are equipment that condense vapors without contact between the fluids. The heat exchange is produced through a ...
-
Manufactured by ITM Heat Transferbased in SPAIN
retrofitted, and new plants alike are installing corrugated tube heat exchangers in an effort to reduce energy consumption, and so improve operating ...
-
Manufactured by EnviroFALK Pharma Water Systems GmbHbased in GERMANY
All heat exchangers are outside the pressure columns and are designed as DTS or simple shell-and-tube heat exchangers– our principle for simple and reliable service and maintenance operations. The production capacity and energy efficiency can be optimised with up to eight steam columns connected in series. ...
-
Manufactured by Water-Gen Ltdbased in ISRAEL
At the heart of the Watergen product line is the revolutionary GENius™ heat-exchange technology, a game-changer that turns air into pure drinking water, in the most efficient way possible. With unique patented design and non-conductive structure, GENius is the world’s most energy-efficient atmospheric water generator (AWG) ...
-
Manufactured by Pentair - Hoffmanbased in USA
Unique counterflow aluminum core for high-efficiency and high-performance heat transfer, except for the XR20 and XR29-08 which use a modified heat pipe core. Models for 115 and 230 VAC power input. UL Listed or Recognized to save customers time and money with agency approvals. Operating temperature range from -20 F/-29 C to 140 F/60 C. ...
-
Manufactured by Pentair - Hoffmanbased in USA
Capacities ranging from 870 watts to 6700 watts. Filterless design. NEMA power cord connection standard. Copper pipe and aluminum fins heat exchanger core. Air movers with thermal protection. Regulating mechanical thermostat set at 35 C (95 F), differential of 4 C (7 F). Operating temperature from 10-50 C (50-122 F). Solenoid water valve. ...
-
Manufactured by WSA Engineered Systemsbased in USA
The deposit of fine matters, such as sand, silt, mud, as well as dead organic matters reduce the flow through the heat exchanger and interfere with the designed water distribution and flow pattern, as well as the required water velocity between the plates. Clogging of the water inlet nozzles by large matters such as twigs, stones, seaweed, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you