Environmental Industry Equipment With Industrial Valve Solutions For Aerospace Industry Applications Available In Cyprus
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 9500 series ball valve is an enhancement to our 9100 Series valve that enables it to meet the demands of the cryogenic market. The 2-piece design is available from 1/2” through 12” with Class 150 or Class 300 integral flanges. The full port ball minimizes the pressure drop across the valve for a more efficient energy use within the piping system. It is designed to be fire ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 11000 series is a 3-piece trunnion ball valve designed to complement our floating ball offerings and is aimed at the higher pressure and larger valve size markets. Made from forged alloys, it is most common in 316 stainless steel (A182-F316) and carbon steel (A105), although other alloys are offered upon request. It is available from 2” through 28” with a full port ball to ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
Precision flow control using a precision machined paddle type orifice plate relies upon a correct installation. If the plate is incorrectly installed it will give unknown inaccuracies in the measured flow and could lead to a costly loss of product. To overcome this, AVCO provides complete ASME B16.36 orifice flange sets to ensure accurate centralization of the orifice bore to the flange bore per ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
Universal orifice plates are fixed geometry devices used for flow measurement, pressure restriction and choked/critical flow. They are extremely reliable as they have no moving parts and use differential pressure measurement to determine flow. They are designed for use in orifice fittings where custody transfer and minimal downtime are critical. AVCO carries a full range of universal orifice ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
AVCO carries a full line of limit switches to fulfill your valve position indication requirements. Starting with the most economical solution, the ALS210 limit switch is a compact mini type Open/Closed limit switch providing a simple cost-effective solution for valve and pneumatic actuator monitoring. The switches are housed in a weather-proof NEMA 4X die-cast aluminum body. If a more visible, ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The highly dependable AVCO pneumatic actuators come in two configurations – double acting and spring return. The actuators share the same design with the only exception being that one model has springs and the other model does not. This allows for the easy change over between double acting and spring return in the field or at the factory. They can also be switched from the standard CCW ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The prime purpose of paddle type orifice plates is flow measurement using differential pressure to determine the flow. As a fixed geometry device, it is extremely reliable as there are no moving parts leading to efficient longevity. These orifice plates are also used for pressure restriction and choked/critical flow giving fool-proof safety protection of critical systems and equipment. AVCO ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 2100 series ball valve is a sanitary/clean valve ideal for use in the biotech, pharmaceutical and high purity industries. The 3-piece design comprises low carbon stainless steel (SS 316L) components, which are electro-polished to 10 Ra surface finish on all contact surfaces. Cavity filled seats are available to minimize dead space in the body cavity and keep operating torque low. We also ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO HP1100 series ball valve is designed for high pressure applications in the smaller pipe size markets where high performance and quality are essential. The precision machined, three (3) piece design was created by AVCO engineers to provide greater flexibility for butt weld, socket weld, NPT and SAE AS5202 ends up to 6000 psi. It is available in sizes from ½” to 2” and ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 1800 series side entry diverter ball valve uses a 90-degree ball to swap or divert flow from one port to another or change one media flow to another media flow through a common port. This gives an easy solution to flush systems via one control point or a single point entry into a chemical mix tank and offers long life service in the most demanding conditions. Pressure classes listed in ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
Due to the tapered inlet and divergent exit venturi tubes are particularly suited to applications where pressure loss needs to be kept to a minimum for differential pressure flow measurement devices. This is due to the high degree of pressure recovery experienced with a venturi. The venturi is also suited to dirty flow applications as the contoured sections encourage the particles to pass through ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 1700 series bottom entry diverter ball valve brings high quality and performance to the diverter and mixing valve market. Using a 90-degree diverter ball allows the valve to flow different media into a common port and is often used for flushing lines or as a common valve into a mixing tank. When installed with a V ported ball it offers metered mixing into a common line. The 180-degree ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO V200 Positioner is very user friendly, easy to add to a valve and simple to calibrate to achieve reliable valve position indication and feedback. The standard housing is a die cast aluminum housing which meets NEMA 4X requirements to prevent environmental intrusion. Other options are available for explosion proof, intrinsically safe, fail freeze and natural gas applications with ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 1100 series ball valve is made for high performance and quality. The investment cast, precision machined, 3-piece design gives great flexibility for butt weld, socket weld, NPT, BSP and flanged ends up to ANSI class 600 or 2000 WOG. It is designed in-house to meet or exceed ASME B16.34 and fully tested to API 598. Materials of construction are stainless steel, carbon steel and various ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34 it incorporates a single piece cryo bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO automation solenoid valve allows for easy control and operation of a pneumatic actuator. The solenoid valve is a NAMUR direct mount thus eliminating the need for tubing and fittings between itself and the actuator. They are available as double acting and can be easily converted from 4-way to 3-way operation. The valves have bi-directional tapered Tee seals to eliminate sticking problems ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 9100 series ball valve is a flanged two 2-piece cast ball valve with integral flanges in stainless steel 316 (CF8M), Carbon steel (WCB), Hastelloy C (CW12MW) or Alloy 20 materials. It is designed to be fire safe per API 607 and meets the requirements of ASME B16.34 and API 598. Available in ANSI class 150 & 300, the valve features a stem with blow-out proof prevention and full port ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
AVCO electric actuators are available in a variety of configurations to meet your needs. All the electric actuators come standard with a NEMA 4/4X aluminum housing. The ISO 5211 mount pad allow for direct coupling to many valves resulting in a lower profile assembly. The shaft gives 90° rotation with a 180° option and its position is clearly shown on a raised indicator for quick visual ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 1900 series V-ported (Vee) flow control ball valve brings together all the advantages of the 1100 series 3-piece ball valve into the precision flow control market. Precise control is achieved by an engineered Vee or slot in the floating ball along with tight tolerances to minimize hysteresis (backlash and judder). Standard balls are available with 15, 30, 45, 60 and 90 degree Vee ports. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you