AET Environmental Industry Equipment Available In Europe
-
Manufactured by Ability Engineering Technology, Inc.based in USA
Hydrogen Gas sees price hikes at higher purity levels. Cryogenic Purification can be an excellent way to get more out of what you can purchase from your current supplier, or increase capacity of what you can sell at a higher purity for that higher ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Disc, tube and strip diffusers for fixed grid aeration systems available in EPDM, silicone and ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
AET provides standalone, modular fixed bed reactor units consisting of fill media packs, support structure, aeration, inlet/outlet and tank. The tanks are available in round or rectangular shapes as well as stainless steel, FRP or PE material. If required, we can also supply blowers and ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Wastewater treatment systems using biofilms that grow attached to a support media can be either an alternative or an improvement to the widely used suspended growth activated sludge process. When the system is operated with a single pass and without return sludge it is called FBBR (Fixed bed Biofilm reactor) or MBBR (Moving bed bio reactor). Especially for industrial pretreatment FBBRs are a good ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
The Jaeger-aeration retrievable strip diffuser rack systems provide a multi-level system redundancy and a fast and easy way to maintain diffusers without basin dewatering. The diffuser racks can be designed for any tank geometry (rectangular, round, toroidal) and mounted to basin walls as well as bridges or catwalks. Better oxygen transfer of fine bubble strip diffusers and DO load dependent air ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Turnkey aeration solutions for activated sludge applications ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Fill media packs in biofilm attached growth applications need a support and restraint system. On the one hand, this system must provide enough strength to hold the fill media in position regardless of occurring water and air turbulence. Not only that, but the system must withstand high loadings due to the weight of fill media and Biofilm growth on the fill media surface. On the other hand, the ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
In conventional clarifiers particles with a higher gravity than waste water will settle down to the tank bottom over time. The closer the gravity of the particles is to the one of waste water as longer takes the settlement process and as larger the clarifiers have to be build. Lamella clarifiers are a very cost effective alternative to conventional clarifiers as they reduce the needed tank volume ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
AET provides standalone, modular tube settler units consisting of tube settler/ lamella clarifier packs, support structure, effluent troughs, sludge removal and tank. The tanks are available in round or rectangular shapes as well as stainless steel, FRP or PE material. If required, the tanks can be equipped with an additional mixing chamber for chemical ...
-
Manufactured by Ability Engineering Technology, Inc.based in USA
If any of the following questions are true for you, you may be in need of a helium recovery system. Do you want to remove air, including moisture, from helium and condition that gas for use in a liquefier? Do you produce ultra pure helium for sale? Do you have a need for ultra pure helium at your facility? Do you utilize helium in a system that would normally be vented? Do you want to re-capture ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
AET provides engineering design support and product solutions for supporting and anti-floating structures for any tank geometry (including round tanks) and in different materials such as stainless steel, aluminum and ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Settled sludge, as well as clearwater, must be continuously removed from the clarifier tank. For sludge removal, different systems are available — sludge agitators in combination with an inclined tank bottom, flushing mechanisms, and rotary or chain scraper systems. Depending on the individual customer’s situation, AET offers support for selecting the right sludge ...
-
Manufactured by Ability Engineering Technology, Inc.based in USA
If you find yourself volume-restricted by your suppliers or in a bind with cost, our helium gas purifiers may be right for your facility. Engineered to enhance minimum 15% helium gas to 5N+, our purifiers are ideal for most any location. Most commonly used by specialty gas distribution corporations or scientific/testing facilities to increase earnings or reduce helium loss. Additionally, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you