Calibrators Equipment Available In Guinea
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS OC500 ozone calibrator is used to calibrate OPSIS Air Quality Monitoring stations. The calibrator generates a well defined ozone concentration which could be preset by the user. It is designed to generate very high ozone concentrations, sufficient for performing accuracy audit and precision ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Calibration liquid (500 ml) 1.4 mS/cm for CTD-Diver 11115901, 11115902 and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Weight set – 1 mg – 100 g. Stainless-steel calibration weight set for lab use. Set of 9 weights plus fractional weights in wooden storage box. Note: Please check with State Department of Weights and Measurements for ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Serves as pressure source to calibrate gaUges and transmitters or to set pressure switches. Includes volume adjuster enabling fine pressure control and bleed valve. Use with manometer or other pressure ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The OG-3 ozone source calibrator is for calibration verification and simple approximate calibration of ozone instruments. It’s available in either 2 outputs: .1 ppm or 1 ppm. The OG-3 is powered by an AC adapter supplying 12 VDC. The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in a laboratory by ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Air Flow Calibrators are generally used to verify the displayed sample flow rate accuracy of complete air sampling systems. Along with the flow measuring device to be calibrated, it is recommended that a “Complete” system for calibration should also include the actual filter holder and filter media in order to duplicate ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Portable, Compact Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy's Mikron M310-HT calibration sources are infrared radiators used for calibrating and verifying output signals of infrared thermometers (pyrometers), thermal imaging systems, heat flux management ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Notable Features: One Calibrator: Multiple Flow Sensors. Vacuum Fluorescent Display (4 lines×24 characters). 4 button key pad for stand alone operation. Mass flow or Volumetric flow. Volume Totalization Feature. Operator selectable Reference T and P. Operator selectable engineering units. Multi gas option. ± 1.0% Full Scale ...
-
PremiumManufactured by ENVEAbased in FRANCE
This is an accesory for the UT-3000 Mercury Ultratracer in monitoring systems at low to intermediate mercury concentrations. The Mercury Instruments Automatic Calibration Unit consists of a specially designed mercury vessel containing elemental mercury of high purity, surrounded by an aluminium jacket cooled by a thermoelectric ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mix your gases now. The intuitive touch display guides you through the settings. Place up to 10 different recipes and call them with a "touch". You do not need any previous knowledge or external PC software. Incorrect operation? Impossible! Another plus: as a mobile variant, the EasyCal is no bigger than a make-up ...
-
ShowcaseManufactured by HI-Q Environmental Products Company, Inc.based in USA
If you require visual accuracy over a large flow range, or wish to calibrate a number of air flow units consisting of more than one flow range, select HI-Q’s Dual Range AFC. The Dual Range unit consists of two pressure differential gauges installed in a single cabinet, that precisely measures both the low and high rate of air ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Calibration device inside 19? and 4U rack. Designed for automatic validation of results at different concentration levels. ZERO / Sample / Cylinder / ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The multifunctional Auto Bump/Calibration (ABC) station provides simple but intelligent testing and calibration of the PS200 portable gas detector. Easy to use, with a durable, user friendly design, this automated test station offers high performance from a PC or stand-alone unit. The ABC station dramatically improves compliance ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Notable Features: Vacuum Fluorescent Display: (4 lines×24 characters). 4 button key pad for stand alone operation. Mass flow or Volumetric flow. Volume Totalization Feature. Operator selectable Reference T and P. Operator selectable engineering units. Multi gas option. ± 1.0% Full Scale (F.S.) Accuracy. User customizable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you