Environmental Industry Equipment With Monitors, Gas Analyzers Solutions For ISO 14644-1/2: 2015 Insights & Solutions Applications Available In Italy
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.1 - 1.0 μm. The High Sensitivity Liquid in Situ (HSLIS-M100e) Chemical Particle Counter provides continuous, real-time particle monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF), and is included in Particle Measuring Systems’ (PMS®) complete line of liquid particle counters. Particle Measuring Systems’ HSLIS Liquid ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
LiQuilaz II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off power to the particle sensor, and provide an external alarm ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Particle Measuring Systems’ HSLIS-M50e Deionized Water Particle Counter provides continuous, real-time monitoring of contamination. The instrument makes it easy to understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of the HSLIS Liquid ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The PMS Environmental Control Cabinet for the Ultra DI 20 and Chem 20 particle sensors is designed to produce the highest-precision particle data at 20 nm, for the cleanest ultrapure water and process chemical systems in the world. The special environmental control design enables temperature control to the required level of 22 - 28 °C + 1 °C/hour. For measuring particles as small as 20 ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
For batch sampling applications using Chem 20 and Chem 20-HI particle counters. The SLS-20 Syringe Liquid Particle Sampler enables Particle Measuring Systems’ Chem 20 or Chem 20-HI particle counters to operate in batch sampling applications. It is ideal for precise, small-volume sampling. The system consists of an SLS-20 for either corrosive or non-corrosive liquids, all connections ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III 110 particle counters are laser diode-based with 1.0 CFM flow rates that comes in 2 models for portable and inline monitoring: Lasair III 110 mobile particle counter: 0.1 micron particle counter can be used as a mobile counter to localize the source of particles, making this an ideal tool for ISO-14644-1 clean room certification for class 1 and 2 cleanrooms. Lasair III 110 inline ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The LiQuilaz II E15P, E20, and E20P laser particle counters are volumetric monitors with sizing sensitivities from 1.5 – 125 µm. LiQuilaz II aser particle counters provide the same levels of accuracy, reliability and repeatability that customers have trusted for many years. LiQuilaz II sensors feature both RS-485 and Ethernet network communications. The new Ethernet capability ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HandiLaz®Mini II handheld particle counter from Particle Measuring Systems is ergonomically designed to fit in the palm of your hand. Rugged and dependable, this small-footprint, lightweight instrument provides tremendous value for cost-conscious users who want a reliable, easy-to-use, handheld particle counter. With a comprehensive set of features, the HandiLaz® Mini II handheld ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The APSS-2000 Liquid Particle Counter for USP 788 sizes and counts suspended particulate matter in a wide range of liquids, including parenterals, to meet all current U.S., European and Japanese Pharmacopoeia standards. When it comes to particle monitoring quality control for liquid drug manufacturers, it’s important to meet regulations while minimizing waste. Along with USP 788 for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you