Crane Equipment
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Most cranes used in the Oil and Gas offshore market have a fixed boom length. Some lattice boom cranes may change the length by adding/removing a boom section. Some box booms may, however, be a telescope boom crane. Mipeg X will measure the extended boom using an extension sensor. This input will not only show the operator the true ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Mipeg X is a crane monitoring system which is monitoring and logging the crane load cycles. The system is an event recorder which mean that no recording is done when the crane is idle. The Mipeg X is a crane monitoring system which is monitoring and logging/recording the crane load cycles. The system is an ...
-
Manufactured by MEC S.p.a.based in ITALY
Standard weight 1900 Kg.Recommanded oil pump 50 lt/min.Max Pressure 260 bar.Slewing torque 21 KNm.Slewing angle 425 °.Hydraulic extension 2.69 m.Max outreach 7 m.Max lifting capacity 60 ...
-
Manufactured by Kalepan Ltdbased in CYPRUS
We design, build, install, test and commission Overhead, Goliath and other types of cranes of lifting capacities to 20 tonnes and spans to 30 metres or ...
-
Manufactured by MEC S.p.a.based in ITALY
Standard weight 1850 Kg .Recommanded oil pump 40 lt/min.Max Pressure 260 bar.Slewing torque 21 KNm.Slewing angle 425 °.Hydraulic extension 1.29 m.Max outreach 6 m.Max lifting capacity 60 Tm.Design Standard H1 ...
-
Manufactured by Cmak Crane Systembased in TURKEY
CMAK manufactures in-house designed jib cranes that are applicable to wide variety of ...
-
Manufactured by Tehnika Plast-Wastewater Solutionsbased in SERBIA
Cranes for lifting pumps and mixes according to customer requirements. Material : Stainless steel ...
-
Manufactured by Oniar LLCbased in ESTONIA
Maximum reach: m: 8,0. Work pressure: bar: 180 / 220. Lifting force (gross): kNm: 48 / 60. Slewing torque (gross): kNm:15,5 / 19. Optimal oil flow (FIX system): l/min: 30-45. Flange rotator: kNm: 45. Suitable trailers: 34 / 134 / 137 / 142 / 237 / 242. Suitable grapples: G18E / ...
-
Manufactured by Tenova S.p.A.based in ITALY
TAKRAF is able to design and supply jib cranes across a wide-variety of sizes and requirements in order to satisfy clients maintenance needs for safe and efficient change-out of heavy ...
-
Manufactured by Afonso O. Costabased in PORTUGAL
Reach [m] 6,0.Load x distance [kg x m] 1000 x 6,0,1500 x 4,5.2000 x 3.Boom [m] 2,8 ...
-
Manufactured by Kay Iron Works (Jorian) Pvt Limitedbased in INDIA
We are EOT cranes suppliers for mill houses, which are designed as per the international standards. Our EOT cranes are provided with hydraulic grab or sling bar feeder tables. We also supply bagasse baling process mechanical and hydraulic type. Designed and developed as per the customer requirements, our EOT cranes provide efficient ...
-
Manufactured by Agroforteka JSCbased in LITHUANIA
We offer AGROFORTEKA cranes with working radii from 5,0 till 6,5m. All models provide great lifting power over a large working radius. Cranes AFA(5.0) have two arms, while AFA(6.0) and AFA(6.5) have a telescopic arm for max. outreach. All models have simple and reliable design as well as overhead lifting cylinder and well set out hydraulic ...
-
Manufactured by Agroforteka JSCbased in LITHUANIA
We offer AGROFORTEKA cranes with working radii from 5,0 till 6,5m. All models provide great lifting power over a large working radius. Cranes AFA(5.0) have two arms, while AFA(6.0) and AFA(6.5) have a telescopic arm for max. outreach. All models have simple and reliable design as well as overhead lifting cylinder and well set out hydraulic ...
-
Manufactured by Scandicon OÜbased in ESTONIA
SCANDIC SC-41 is a lightweight crane and is suitable for small trailers like our ST-6. It can also be mounted on A-support legs and attached directly to the tractor using 3-point fastenings. The loader can be equipped with Hydrocontrol TR-5/7 X-Y control valve. It reaches as far as 4,1 m and can lift off a 300 kg load from that ...
-
Manufactured by VDL Translift bvbased in NETHERLANDS
IES demountable system for both underground and aboveground bottomdischarge collection ...
-
Manufactured by Scandicon OÜbased in ESTONIA
Max.outreach, m 4,1 5,3 6,5 7,2 7,2 8,3. Max. operating pressure, bar 180 180 180 180 180 180. Slewing angle 360° 360° 360° 360° 360° ...
-
Manufactured by Scandicon OÜbased in ESTONIA
Max.outreach, m 4,1 5,3 6,5 7,2 7,2 8,3. \Max. operating pressure, bar 180 180 180 180 180 180. Slewing angle 360° 360° 360° 360° 360° ...
-
Manufactured by MEC S.p.a.based in ITALY
Standard weight 2000 Kg.Recommanded oil pump 40 lt/min.Max Pressure 260 bar.Slewing torque 21 KNm. Slewing angle.425 °.Hydraulic extension 2.16 m.Max outreach 6 m.Max lifting capacity 60 ...
-
Manufactured by Oniar LLCbased in ESTONIA
Technical information: 6800. Maximum reach - m: 6,8. Work pressure: bar - 180 / 220. Lifting force (gross)- kNm: 48 / 60. Slewing torque (gross) - kNm: 15,5 / 19. Optimal oil flow (FIX system): l/min: 30-45. Flange rotator - kNm: 45: 45. Suitable trailers: 34 / 134 / 137 / 142 / 237 / 242. Suitable grapples: G18E / ...
-
Manufactured by Oniar LLCbased in ESTONIA
Maximum reach: m: 7,5. Work pressure: bar: 180 / 220. Lifting force (gross): kNm: 69 / 85. Slewing torque (gross): kNm: 21 / 26. Optimal oil flow (FIX system): l/min: 45-60. Optimal oil flow (LS system): l/min: 80. Flange rotator: kNm: 55. Suitable trailers: 137 / 142 / 237 / 242 / 246 / 342 / 346. Suitable grapples: G18E / G20 / G22E / ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you