Pretreatment Equipment Available In Uganda
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Compact wastewater pre-treatment unit that integrates a TTC and a DA in a single unit, thus carrying out several processes: roughing, desanding and degreasing. Highly efficient equipment for wastewater ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Screening, conveying and compacting of heterogeneous solids in a single unit. Equipped with a perforated mesh screen at the water inlet for greater filtration. Variable inclination up to 35º. Suitable for urban wastewater, agricultural industries and agri-food ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
For the movement of waste. Can be horizontal or with inclinations of up to ...
-
Manufactured by CUSS Chriwa Umwelt-Systemtechnik und Service GmbHbased in GERMANY
Pump sump, Coarse sieves. Oil separator, Sand separator, Drum and curved ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
They have a high mixing capacity, as they have a double internal mixer ...
-
Manufactured by Teko Ltd.based in CROATIA
Application: Unit is predicted for the purpose of separating particles in a mechanical pretreatment. By selection of the appropriate unite, effective separation of the fine impurities from the waste water is enabled, after which thus impurities are extracted into the waste containers,. Standard device is dimensioned to extract at least ...
-
Manufactured by Hubei Lidi Machine Tool Co., Ltd.based in CHINA
Usage: It’s used for pretreatment of scrapped small cars, integration of oil suction and receiving device, and it’s equipped with refrigerant recovery device, and oil storage device. Vehicle Pretreatment Platform Founded in 1969, Hubei Lidi Machine Tool Co., Ltd. has gone through three stages of development. It currently ...
-
Manufactured by Hubei Lidi Machine Tool Co., Ltd.based in CHINA
Lifting Trolley Pretreatment Platform Founded in 1969, Hubei Lidi Machine Tool Co., Ltd. has gone through three stages of development. It currently belongs to Miracle Automation Engineering Co.,Ltd (stock code: 002009), which is located in Yichang, Hubei province, and is a national key high-tech enterprise with 6 subsidiaries and 7 ...
-
Manufactured by Dynatec Systems Inc.based in USA
Pretreatment technologies are used to protect Membrane Bioreactors (MBR)s and improve overall system performance. Prior to membrane separation, some wastewater applications can be improved by a thorough pretreatment process. Dynatec provides complete treatment systems with all required pretreatment steps integrated into the design with ...
-
Manufactured by Henan Mingjie Environmental Equipment Co., Ltdbased in CHINA
Capacity:20-40 tires/hour. Pulling force(T): 13. Max.tire diameter 1200mm. Power(KW): 11KW. Stroke distance: 1300mm. Dimension(L*W*H): ...
-
Manufactured by Norsk Biogass ASbased in NORWAY
The BioPrePlant System is a unique system for pre-treatment of food waste. All BioPrePlant-Systems are delivered with a customized automation and control system. We offer our clients a process plant that to a great extent is operated automatically, with a minimum of operator interventions ...
-
Manufactured by Salherbased in SPAIN
The compact pretreatment plant (PPC) is a compact dewatering and degreasing plant for the filtration or screening of solids, the elimination of fine solids with a size between 0.25-3 mm, the elimination of sands and dense solids and the elimination of oils and grease. It can incorporate a helical screw screen (PPC-TAHEL AND ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
The compact preatreatment unit EnviroPrep are machine-welded in stainless steel with three fucntions, screening, sand removal, and fat removal of raw effluents. Enviromax units are designed to accept flows from 10 up to 500 m3/hr, but several units can be installed in parrallel to accept flow variation due to seasonality or to higher flow. An efficient screening is performed with a Spirascreen ...
-
Manufactured by Arya Water Technologiesbased in INDIA
The objective of pretreatment process is to improve the quality of feed water. It is done prior to the main process to protect the more sensitive downstream process units whose efficiency may be severely affected by untreated raw ...
-
Manufactured by Owatec Groupbased in FINLAND
OwaPre is a solution built in a sea container for pre-treatment before the actual water treatment process. Automated valves separate large particles directly for further processing, ensuring processes’ operational ...
-
Manufactured by Tong Xiang Small Boss Special Plastic Products Co., Ltdbased in CHINA
Sewage pretreatment sand settling board in quarry PP Plastic hexagon honeycomb packing Tube Settler. PVC Plastic hexagon honeycomb packing Tube Settler, Lamella Plate Clarifier is very suitable in all different clarifiers and removing sand. It is regarded as universal water treatment equipment in water supply and drainage engineering. It has ...
-
Manufactured by Dongguan Huanyi Instruments Technology Co., Ltd.based in CHINA
Pretreatment chamber can provide standard temperature and humidity VOC clean environment. After testing material temperature, humidity, pressure and VOC release balance, the pollutant release rate and release characteristics of materials and products can be ...
-
Manufactured by ESD Waste2Water, Inc.based in USA
VIPIR 3 in 1 Paint Pretreat and Powder Coating Prep System for Powder Coating and Painting Operations. All of this in one, compact unit. The VIPIR system can be incorporated with your current wash operation, designed as part of a new wash operation, or be combined with a VIPIR pad for a stand-alone wash system. All of this in one, compact ...
-
Manufactured by IN-EKO Team s.r.obased in CZECH REPUBLIC
The compact multifunctional equipment is intended for the removal of coarse municipal impurities, gravel and sand from the influent water, and transport thereof to containers. Depending on the local requirements and economical aspects, it is possible to construct the multifunctional equipment so as to ensure only basic functions or to provide additional functional options for various flow ...
-
Manufactured by IN-EKO Team s.r.obased in CZECH REPUBLIC
The compact multifunctional equipment is intended for the removal of coarse municipal impurities, gravel and sand from the influent water, and transport thereof to containers. Depending on the local requirements and economical aspects, it is possible to construct the multifunctional equipment so as to ensure only basic functions or to provide additional functional options for various flow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you