Microphones Equipment Available In District Of Columbia
-
Manufactured by PCB Piezotronics, Inc.based in USA
This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration. Click the following for individual component ...
-
Manufactured by PCB Piezotronics, Inc.based in USA
This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration. Click the following for individual component ...
-
Manufactured by Wildtronics, LLCbased in USA
The Wildtronics Amplified Professional Mono Parabolic Microphone includes built-in preamps that can connect to almost any recording device, plus it has a direct headphone output. The built-in preamp makes it especially useful for obtaining professional recordings with low cost, portable equipment. ...
-
Manufactured by Norsonic ASbased in NORWAY
The Nor1329 is a microphone mast for permanent installation of noise monitoring systems based on Nor1501 double walled enclosure and Nor1210 All-Weather Microphone or Nor1212 microphone protection ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
PCB Larson Davis offers wide range of condenser microphones for precision measurements in diameters of ¼ inch, ½ inch and 1 inch. Each microphone is supplied with an individual calibration ...
-
Manufactured by Wildtronics, LLCbased in USA
The Wildtronics parabolic microphone is the most advanced, best performing, and affordable parabolic microphone on the market. Buy yours today, and it will normally ship the next ...
-
Manufactured by XARION Laser Acoustics GmbHbased in AUSTRIA
The membrane-free Eta600 Ultra Optical Microphone represents the latest development in XARION's sensor technology. With a frequency bandwidth ranging from 50 kHz to 4 MHz for air-coupled ultrasonic measurements and the highest sensitivity within the Eta product line, this sensor proves to be optimal for use in ultrasonic testing ...
-
Manufactured by Listen Incbased in USA
Listen offers 2 MEMS digital microphone measurement interfaces from Portland Tool & Die, the laboratory-grade DCC-1448 and the low cost PQC-3048 for production line use. The DCC-1448 and PQC-3048 interface your MEMS microphone to the SoundCheck test system, converting the 1-bit PDM output of a Digital MEMS microphone to the 24-bit, 48kHz ...
-
Manufactured by PCB Piezotronics, Inc.based in USA
1/4-inch pressure prepolarized 377A12 microphone, with 1/4-inch preamplifier 426B03 and TEDS ...
-
Manufactured by Norsonic ASbased in NORWAY
The Nor1216 is a measurement microphone for all-weather conditions designed for use with the Nor140/Nor150. It features SysCheck verification and a heated preamplifier. It is intended for permanent outdoor applications. ...
-
Manufactured by Norsonic ASbased in NORWAY
Norsonic has developed a range of windscreens in different sizes and shapes dependent on the application they are intended for. All windscreens are made from open cell polyurethane ...
-
Manufactured by ACO Pacific, Inc.based in USA
The 7052SYS Type 1.5 measurement microphone system offers a cost effective option to acoustic measurements. Perfomance: 4 Hz to >20 kHz response, 20 mV/Pa sensitivity and a 'A' weighted noise floor less than 20 dBA. Compatible with ACOtronTM,CCLD, IEPE, CCLD, IEPE equipment the 7052SYS features the 7052H Type 1.5 with its rugged ...
-
Manufactured by Listen Incbased in USA
SoundConnect is a cost-effective, single-channel microphone power supply for audio test ...
-
Manufactured by ACO Pacific, Inc.based in USA
The MK224SYS IEC61094-4 compliant measurement microphone system offers a cost effective option to acoustic measurements. Perfomance: 8 Hz to 18 kHz response, 50 mV/Pa sensitivity and a "A" weighted noise floor less than 14 dBA. Compatible with ACOtron™,CCLD, CCLD, and IEPE equipment the MK224SYS features the MK224 IEC61094-4 ...
-
Manufactured by Norsonic ASbased in NORWAY
½" free-field, high sensitivity, low cost self-polarised class 1 Microphone. Ideal for use in multi channels systems or other applicationos that requires a self polarised IEC 61672 class 1 microphone at low ...
-
Manufactured by GeoSonics/Vibra-Tech Inc.based in USA
Microphone – High Pressure: Microphones are available up to 168 dB to measure high noise levels from close proximity blasting or other impulsive sources. Leases can be arranged for units complete with microphones for a short-term ...
-
Manufactured by NINGBO SANCO ELECTRONICS CO., LTDbased in CHINA
3.50x2.65x0.98mm -38+/-3dB 20-20000Hz 5V Analogue SMD MEMS MIC Microphones. Packaging: tape and reel. Productivity: 500KPCS monthly. Transportation: Ocean,Land,Air. Place of Origin: CHINA. Supply Ability: 500KPCS monthly. Certificate: ISO9001. HS Code: 8531809000. Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union. Incoterm: ...
-
Manufactured by Hasler Groupbased in FRANCE
The electronic Ears senses the noise of the mill. The Ear consist of a very sensitive microphone installed at the mill inlet, at the grinding ball impact point, and as close as possible to the mill shell. The foam of the Electronic Ear must nearly touch the mill shell between two rows of bolts. The head of the micropone is 4-5 cm in the ...
-
Manufactured by Norsonic ASbased in NORWAY
½” free-field, 50 mV/Pa sensitivity microphone. A general purpose microphone covering the frequency range from 3.15Hz to 20 kHz. Correspond to the Class 1 of the sound level meter standard IEC ...
-
Manufactured by Norsonic ASbased in NORWAY
½" free-field, high sensitivity, low cost self-polarised class 2 microphone. Ideal for use in multi channels systems or other applications that requires a self polarised class 2 microphone ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you