Fiberglass Equipment Available In Oregon
-
PremiumManufactured by Amafilter®based in NETHERLANDS
PhasePUR G Series Fiberglass Phase Coalescing Filter Elements are designed to coalesce two immiscible liquid phases within a stream to aid separation. These cartridges are also highly efficient particulate filters. These elements should always be protected by a pre-filter. In installations where no pre-filter exists, the JCP version ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
LiquiPleat G Series Microfiberglass filters are pleated liquid filtration elements designed for applications with large flow and contaminant ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. The one-piece 48-inch Fiberglass Tile Probe included in the kit is ideal for locating irrigation, power and water lines, and it should be used as a primary device to determine ...
-
PremiumManufactured by AMS, Inc.based in USA
The Deluxe AMS Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. This kit features the trusted AMS Signature Series thread pattern, which takes 2-1/2 revolutions to connect & disconnect. The two-piece 36-inch Tile Probe (with rounded safety tip) ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
LiquiPleat GX Series filters are constructed of a combination of Nomex and Microfiberglass medias specifically designed for higher temperature rated applications. Available in various grades of high performance media with hardware options to suit your specific application. ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Modular storage and water treatment tanks manufactured by Toro Equipment in glass composite. The ideal solution in logistically challenging environments or with space and time constraints that require lightweight and versatile solutions on short lead ...
-
Manufactured by Kenway Corporationbased in USA
As with its process pipe manufacturing, Kenway also custom designs its duct and vent piping systems to suit each application. For highly corrosive applications or abrasive applications, we provide specialty liners. Our products meet or exceed Class I Fire Retardant ratings per ASTM E-84 and can achieve smoke spread ratings less than 50 if ...
-
Manufactured by Prime Line Products, Incbased in USA
Woven three dimensional glass fabric coated on one side with a PVC Coating. Used for multiple 90 degree bends and transitions. Can be used with any resins. Extremely good with UV curing resins. Extremely high Flexural Modulus due to it being fiberglass. Available in 2-3″, 3-4″, 4-6″, 6-8″, 8-10″ and ...
-
Manufactured by Mid-Mountain Materials Inc.based in USA
HYTEX 700 Textiles combine the tensile strength of Kevlar® with the wear resistance of fiberglass material, to produce products with excellent high temperature resistance and ...
-
Manufactured by CST/bergerbased in USA
Designed with superior accuracy, these Long Tapes offer an open-reel construction with high-impact ABS plastic and a variety of lengths to fit user needs. The Vi In. tape is made of nonwoven PVC-coated fiberglass with wear-resistant ...
-
Manufactured by Hustler Conveyor Companybased in USA
Hustler Conveyor light-duty oscillators use fiberglass rocker arms. Units can be built to virtually any width and length to fit your ...
-
Manufactured by Advanced Plastic Technologies S.r.l. (ATP )based in ITALY
TORO 25 FIBER EvO system is a three-layer pipe that can improve and stabilize the mechanical properties of the traditional PPR pipe. The special PP-RCT blend, reinforced with fiberglass, provides a mechanical stabilization in case of thermal expansion, giving the pipe a coefficient of linear expansion equal to 0.04 mm/m °C. TORO 25 FIBER ...
-
Manufactured by W&W Fiberglass Tank Co.based in USA
Features: Heavy Duty Fiberglass Construction, Fully fitted out to API 12-P configuration, Tank shells built to API 12-P laminate specification, Large selection of sizes from 4'x15' (34bbl) – 15'6"x30' (1000 bbl), Large selection of optional fittings, hatches and walkways available, Will not rust or corrode, Virtually maintenance free, ...
-
Manufactured by Containment Solutions, Inc., (CSI)based in USA
While the ultimate life span of a fiberglass manhole would be dependant on the types of chemicals present in either the ground water or the wastewater, it is possible to state that fiberglass will far out last concrete in virtually every application. This benefit is immediately perceptible to owners that have had problems in the ...
-
Manufactured by Belco Manufacturing Inc.based in USA
Belco Manufacturing Co. Inc. has been manufacturing fiberglass dampers for the air-handling industry since 1980. At our facility in Belton, Texas we supply corrosion-resistant Fiberglass Reinforced Plastic (FRP) dampers that are used to regulate air flow or shut off and isolate a system. The operating conditions for the dampers are ...
-
based in INDIA
We make safe ladders All our ladders are designed and made to meet the applicable standards & requirements of the National (IS) as well as International standards like American National Standards Institute (ANSI), OSHA etc. OSHA has set minimum requirement with respect to the use of ladders in business and industry. Variety of ANSI safety codes are available depending on material and type of ...
-
based in USA
Apexx utilizes the latest in chop and filament winding equipment available in the industry today, providing our customers with the best quality above and below grade fiberglass tanks. We are located in southern indiana, which gives a central location to serve our customers. Our fiberglass chemical tanks are corrosion resistant, and are ...
-
Manufactured by Composite & Metal Products USA, Inc.based in USA
FRP or Fiberglass reinforced thermoset plastic pipe is often the material of choice for corrosive process systems. This is due to a variety of factors, ...
-
Manufactured by Shuangshi New Material Co.,Ltd.based in CHINA
Fiberglass geogrid is made of excellent reinforcement type non-alkali glass fiber yarn which is weaved into the base material, then coated with high-quality modified asphalt. The fiberglass geogrid has high tensile strength and good heat resistant performance. it can largely increase the bearing capacity of the road and enhance the service ...
-
Manufactured by Precision Tank, Inc.based in USA
Fiberglass tanks are designed to eliminate the effects of fertilizer & chemical corrosion, providing long-term performance. All Precision Tank fiberglass tanks come with a 3-year warranty. lsophthalic polyester resin is used throughout our standard fiberglass tanks. Vinyl ester resin is also offered for harsh environmental ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you