Heat Exchangers Equipment Available In South Dakota
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
With the effective recovery of flue gas heat, you can save up to 14% on fuel and, at the same time, reduce emissions. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 14% when using an additional downstream condensing heat ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
A flue gas heat exchanger is part of the standard equipment for energy-optimised and environmentally friendly boiler operation. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 15% when using condensing technology - Intelligent ...
-
Manufactured by Hydroflo Pumps - part of the Taco family of companiesbased in USA
Leak Guard Series Double Wall Liquid to Liquid Heat Exchangers are built to ASME requirements in a wide variety of materials so you can choose just what you need for your application. Shells, heads, tubes, tube sheets, separators and tie rods are all available in optional ...
-
Manufactured by SACOMEbased in SPAIN
Tube in Tube Heat Exchanger with compact design and removable inner tube. This model of tubular heat exchanger is part of our Sanitary Line. ...
-
Manufactured by SACOMEbased in SPAIN
Annular space heat exchanger with removable inner tube and axial product inlet. Special heat exchanger design for products with fibers or pieces. This tubular heat exchanger is part of our new Sanitary Line of heat exchangers. ...
-
Manufactured by SiGa-Tech Sp. z o.obased in POLAND
Type WCrr heat exchangers are used to heat sewage sludge, process suspended solids and other media with dry matter less than 8%. We offer heat exchangers with housing, one or multi-sectional. Sludge recuperators are produced with autonomous heating systems and external heat ...
-
Manufactured by Napier-Reid Ltd.based in CANADA
Time tested and trusted for the critical application of heating or cooling digester sludge. Napier-Reid has emerged as a leading manufacturer of sludge heat exchangers for municipal and industrial wastewater treatment ...
-
Manufactured by CSO Group Ltdbased in UNITED KINGDOM
The Lackeby Heat exchanger sludge / sludge unit consists of two heat exchangers sludge / water connected by a closed water circuit. This creates a compact unit that is simple to install and minimises installation volume. The closed water circuit between the heat exchangers eliminates the risk of ...
-
Manufactured by Micro Cooling Concepts (MC2)based in USA
MC2's compact heat exchangers use laminated foil construction to reduce the core size and weight of Air/Air, Liquid/Liquid and Liquid/Air heat ...
-
Manufactured by SACOMEbased in SPAIN
The S-TF20-I tube in tube sanitary heat exchanger is a tube in tube heat exchanger with non removable inner tube. This double tube heat exchanger is part of our Sanitary Line of shell and tube heat exchangers. ...
-
Manufactured by Claro Incbased in CANADA
Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge energy transfer. Claro modular tube-in-shell heat exchangers, large gap heat exchangers, and Big Bubble Gun Mixers with heating ...
-
Manufactured by Geurts Heatexchangers B.V., part of Heilig Groupbased in NETHERLANDS
FLUE GAS HEAT EXCHANGER TRANSFERS EXHAUST GAS HEAT TO ENERGY: Implementing a flue gas heat exchanger to capture exhaust gas and to transfer the heat to different energy consuming part of your installation, saves not only energy but also saves money. Moreover, it is a very sustainable way to ...
-
Manufactured by Elgressy Engineering Services Ltd.based in ISRAEL
The SCP (Scale Crystallization Prevention) is an electrolytic system that prevents scale deposition, reduces and removes chlorine and bacteria from the water, and substantially reduces corrosion rates. The SCP is connected externally to the heat exchange unit and needs no complicated installation procedures or changes to your existing ...
-
Manufactured by DDI Heat Exchangers Inc.based in CANADA
The 3 key advantages of our DDI technology are due to our Patented Technology of Rectangular channeled heat exchangers.It is not the common tube-in-shell technology nor the common Spiral structure of heat exchangers. WE BUY YOUR WASTE. Worlds only direct SLUDGE TO SLUDGE heat ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Our double-pipe heat exchanger is used to efficiently heat sludge at biogas and waste water treatment plants. Using the counter-flow principle, sludge is heated evenly, and flows back to the process. Our WT is custom-designed, manufactured entirely in stainless ...
-
Manufactured by Equirepsa, S. A.based in SPAIN
EQUIREPSA designs and manufactures condensers, not only as a part of our own vacuum systems, also for a variety of industrial applications. One type of tube and shell heat exchangers are the Surface Condensers. These are equipment that condense vapors without contact between the fluids. The heat exchange is produced through a ...
-
Manufactured by Bridge12 Technologies, Inc.based in USA
. However, the lowest temperature that these devices typically can achieve is about -90ºC (183 K). To achieve lower temperatures typically a dry nitrogen gas stream that is cooled in a heat exchanger using liquid nitrogen (LN2) is ...
-
Manufactured by Claro Incbased in CANADA
Claro designs and manufactures two proprietary heat exchangers that heat, cool, and recover energy by means of sludge-to-sludge energy transfer. Claro twin modular tube-in-shell or large gap heat exchangers can suit a wide variety of applications and footprints. Claro heat ...
-
Manufactured by WSA Engineered Systemsbased in USA
The deposit of fine matters, such as sand, silt, mud, as well as dead organic matters reduce the flow through the heat exchanger and interfere with the designed water distribution and flow pattern, as well as the required water velocity between the plates. Clogging of the water inlet nozzles by large matters such as twigs, stones, seaweed, ...
-
Distributed by Holtec Internationalbased in USA
Holtec’s component cooling water heat exchangers (CCWHX), designed and fabricated to the highest quality standards, efficiently reject heat, maintaining critical equipment and plant temperature ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you