Thermoplastic Equipment Available In Vatican City
-
Manufactured by Apium Additive Technologies GmbHbased in GERMANY
PEEK (Poiyetheretherketone) is a semi-crystalline thermoplastic which is ideally suited for applications with thermal, chemical and mechanical exceptional conditions, it allows users to reduce overall weight, extend life time and thanks to the Material Extrusion it increases design ...
-
Manufactured by Dyna Flex Inc.based in USA
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. Inner Core: Oil resistant synthetic polyester tube. Reinforcement: Braided high tensile aramid fiber. Cover: Orange high abrasion resistant polyurethane. Temperature Range: -40 degrees F. to +212 degrees F. (-40 degrees C. to +100 degrees ...
-
Manufactured by United Pipeline Systemsbased in USA
The Tite Liner RT system is a raised temperature polyethylene material specifically designed for the severe conditions present in oil & gas and industrial environments. The system utilizes PE-RT resin, a bimodal high-density polyethylene resin technology that enhances its high temperature ...
-
Manufactured by Dyna Flex Inc.based in USA
Recommended for: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. For pneumatic or gaseous systems use perforated (pin-pricked) ...
-
Manufactured by Atarfilbased in SPAIN
ATARFLEX W is a geomembrane manufactured with thermoplastic polyolefines with excellent flexibility, weldability and mechanical properties which make this product suitable for interior of depots, tanks and tunnel waterproofing, and in general applications not in the open air (not exposed to UV radiation) where flexibility and high welding ...
-
Manufactured by J P Specialties, Inc.based in USA
Earth Shield® Thermoplastic Vulcanizate Waterstop (TPV) (aka TPE-R) is used as a fluid-tight diaphragm, embedded in concrete, across and along the joint, for primary and secondary containment structures. Earth Shield® Chemical Resistant Waterstops are resistant to a wide range of oils, solvents, and aggressive chemicals. Alcohol, ...
-
Manufactured by Wilden Pump - a PSG Dover Brandbased in USA
Wilden TPE diaphragms are durable, low cost and operate over a wide temperature range. Injection-molded of premium grade engineering resins, TPE diaphragms have inherent tensile strength without the need for fabric reinforcement. TPE diaphragms are available in Wilden’s integral piston and EZ-Install diaphragm design as well as the traditional AODD diaphragm shape ...
-
Manufactured by Pipex px Limitedbased in UNITED KINGDOM
Pipex px® design and manufacture bespoke thermoplastic pressure vessels in a range of premium-grade materials to suit project requirements. Pipex px Thermoplastic Pressure Vessels are bespoke, and manufactured offsite to exact customer specifications & standards. The pressure vessels and can be supplied in combination with pumps, ...
-
Manufactured by Digestors Silos & Tanks Limited- Silotankbased in UNITED KINGDOM
Thermoplastic chemical tank systems are fabricated from black, natural or beige polypropylene material, black colour HDPE and natural PVDF & ECTFE. Standard range of systems can bew supplied up to 50,000 litres. Rectangular Tanks are fabricated from HDPE and PP as standard. Tanks are built to customer specification and ...
-
Manufactured by Dyna Flex Inc.based in USA
Recommended For: Medium pressure hydraulic lines for heavy-duty use on hydraulic systems, lubrication lines, and solvent lines. Meets or exceeds SAE100R8 requirements. For pneumatic systems use perforated (pin-pricked) hose. Inner Core: Oil resistant synthetic polyester tube. Reinforcement: Braided high tensile aramid fiber. Cover: Black high abrasion resistant polyurethane. Temperature Range: ...
-
Manufactured by Dyna Flex Inc.based in USA
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic or gaseous systems, use perforated (pin-pricked) ...
-
Manufactured by Master Lock Company LLCbased in USA
1-1/2' (3.8cm) wide 1-3/4' (4.4cm) tall Thermoplastic orange body, shackle w/1-1/2' (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA 'one employee, one lock, one key' directive. High ...
-
Manufactured by Sontec Instruments, Inc.based in USA
With silicone mat and metal clasps / autoclavable; 1103-717 ; double decker ; 11"x7"x1 1/2" 1103-717D singledeep ;11"x7"x11/2". 1103-712 ; single shallow ; 11" x 7 x 3/4". * Other sizes available upon request, requires special order. Check your ...
-
Manufactured by Dyna Flex Inc.based in USA
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. Inner Core: Oil resistant synthetic polyester tube. Reinforcement: Braided high tensile synthetic fiber. Cover: Orange non-conductive high abrasion resistant polyurethane. Temperature Range: -40 degrees F. to +212 degrees F. (-40 degrees C. to +100 degrees ...
-
Manufactured by Dyna Flex Inc.based in USA
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. Inner Core: Oil resistant synthetic polyester tube. Reinforcement: Braided high tensile synthetic fiber. Cover: Orange, non-conductive high abrasion resistant polyurethane. Temperature Range: -40 degrees F. to +212 degrees F. (-40 degrees C. to +100 degrees ...
-
Manufactured by FlowJEMbased in CANADA
FlowJEM offers customized devices in a range of different thermoplastic materials based on chemical compatibility, optical transparency and temperature ...
-
Manufactured by NGB Elram Industries Ltd.based in ISRAEL
No corrosion. FDA&FSDA approval. From 12 to 50 mm. Interchangeable with cast iron standarts units. Maintenance free. Temperature work from – 35 to 102 degree. Tensile strength at break (ASTM 0630) is an. impressive 17.300 PSI. Excellent mechanical strength’ stiffness & dimension. stability. Stainless Steel greasers and inserts. Solid base prevent dirt & bacteria. ...
-
Manufactured by Hebei Orient Rubber & Plastic Co., Ltd.based in CHINA
SAE 100 R8 Thermoplastic Hydraulic Hose is suitable for delivering synthetic, petroleum or water-based hydraulic fluids and it is mainly used in high pressure working conditions. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality hydraulic fluids resistant thermoplastic, making the hose widely ...
-
Manufactured by Naargo Industries Private Limitedbased in INDIA
Thermoplastic submersible pumps are ingeniously designed and developed employing latest engineering softwares, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The integrated and most modern quality assurance systems used at every stage of the production and flawless ...
-
Manufactured by Aetna Plastics Corp.based in USA
Polypropylene (PP) is a member of the polyolefin family and is one of the lightest plastics known. It possesses excellent chemical resistance to many acids, alkalis and organic solvents. PP is one of the best materials to use for systems exposed to varying PH levels, as many plastics do not handle both acids and bases well. It is not recommended for use with hydrocarbons and aromatics. Typical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you