Aysix - Model DTG Series - Industrial Digital Temperature Gauges
From Temperature - Industrial & Sanitary
The DTG series Digital Temperature Gauges are a complete solution for most industrial temperature monitoring and temperature indicating applications. Of high quality construction, these gauges features a bright and large 4-digit red LED display with an analog 4-20 mA output. Based on AYSIX’s patented MIST technology, they are designed for optimum accuracy and performance. The series DTG's are an ideal replacement for bi-metal, liquid bulb and gas thermometers.
Features:
The DTG series can be factory calibrated to customer specified temperature range. As with any other MIST series patented technology sensor, the DTG’s built-in programmable transmitter can be re-scaled and re-calibrated using the optional interface module and software. The DTG arrives factory scaled and calibrated to the customer’s specified temperature range. No costly field calibration is required. If the application changes, the DTG can be re-scaled at any range within the sensor limits while maintaining its accuracy. Reprogramming is done with the optional PC interface module and software.
Housing, probe and fitting material is all fabricated from Stainless Steel 316. DTG is rated to NEMA 4X ( IP65 ). Many mounting configurations are available to meet customer requiraments. Standard extension cables offered are PVC or Silicon insulated wires. Some models are available with M12 Micro-Male Connector.
Features:
- Large 4-digit red LED display
- Field re-programmable with optional PC interface module and software
- Security temper protection for re-programming
- 4-20 mA programmable linearized signal output
- Utilizes self-calibration feature for accurate and stable performance
- Utilizes Pt-100 Ohm RTD Class A element for temperature sensing
- Micro M12 male plug or cable gland for electrical connection
- IP 65 / NEMA 4 rated environmental protection
- All stainless 316 construction
- Easy installation with various mounting configurations
Benefits:
- Replacement for Bi-Metal, Liquid Bulb and Glass Thermometers
- Pharmaceutical
- Food Preparation
- Utilities and Municipal
- Refineries
- Chemical and Petrochemical Plants
- Paper Mills
- Hydraulics
Specifications
General Specifications
- Sensing Element: RTD, Type Pt100 DIN EN 60751, Class A
- Temperature Ranges: re-scalable between -200C to 600C or -50C to 200C depending model
- Switching Ranges: programmable between -200C to 600C or -50C to 200C depending model
- Hysteresis: 1% of range by factory setting.
- Accuracy: +/- (0.25C + 0.40% of reading) max. with default calibration.
- Accuracy: +/- (0.10C + 0.20% of reading) max. with one-point factory
- Open circuit detection: Upscale (22mA) or Downscale (2.5mA) current output. Error message on LED display
- Warm-up: 30 secs
- Response Time: 0.5 sec to 30 sec ( software selectable )
- Display: 4-DIGITS LED, decimal point selectable by software.
- Display Resolution: +/-0.02% F.S. +/-1 DIGIT
- RFI effect: 1% or less typical
- Temp. Effect: < 0.01% FS / C
- Amb. Temp Range: -40C to 80C ( -40F to 176F )
- Storage Temp. Range: -50C to 85C (-58F to 185F)
- Max. Pressure: 500 PSIG (on probe )
- Housing Material: Stainless steel 316
- Probe Material: Stainless steel 316 standard
- Cable Material: PVC, Teflon, Silicone, SS armored Teflon
- Environmental Protection: NEMA 4 / IP 65
- Power Supply: 9-36 VDC, polarity protected
- Current Output: 4-20mA (3 wires configuration ) linear to temperature.
- Supply effect: 0.005 % / V
- Electrical Connection: Micro-DC male plug or cable only
- Switching Logic: N.C. or N.O. Software selectable.
Downloads related to this product
Customer reviews
No reviews were found for Aysix - Model DTG Series - Industrial Digital Temperature Gauges. Be the first to review!