Aysix Technologies

- Model MIST Series - Sanitary Temperature Sensors

From

0

We offer a complete line of hygienically designed process measurement devices which are perfectly suited for use in food, dairy, chemical, and pharmaceutical industries. AYSIX sanitary sensors carry the 3-A mark and are designed and manufactured to meet the requirements of 3-A Sanitary Standards for Sensors and Sensors Fittings and Connections Number 74-03.

The sanitary sensors are easily installed into a “tee”, “cross”, or directly into a sanitary tube and feature all stainless steel construction. All popular sanitary connection styles available. Wetted surfaces are machined and polished to meet 3-A standards and are free of pits and crevices that might shelter bacteria or impurities. Assemblies are hermetically sealed and built to withstand industrial washdowns.

The sanitary sensors contain an encapsulated platinum RTD Class A element providing high accuracy, repeatability and vibration resistance. Assemblies are available with a variety of electrical connections and connection heads ( including stainless steel, polypropylene and Bakelite ) for easy wiring. A wide variety of options are available, including dual elements and reduced tips which improve time response without compromising the mechanical strength of the sensor. MIST™ Series Sanitary Sensors have an integrated transmitter with a variety of output options such as 4-20 mA loop powered or 3 wire voltage output with 0-5 VDC, 1-5 VDC and 0-10 VDC options.

  • Field Programming
  • Superior Accuracy
  • Compact Size
  • Robust and Long Lasting
  • Best Value
  • Easy Installation
  • Traceable Calibration
  • Sanitary design hermetically sealed, with extension cable
  • Stainless Steel construction
  • Connection: Tri-clamp, all std. sizes

General Specifications

  • Wetted surface material: Stainless steel 316 / 316L, dual certified
  • Cabled probe and M12 connection: Meets NEMA 6P ( IP67 ), hermetically sealed
  • Cable Material:: PVC, Teflon, SS armor over Teflon
  • Protection: Meets NEMA 6P ( IP67 ), hermetically sealed
  • Storage Temperature: -40 C to 80 C
  • Temp. Range: -40 C to 80 C ( housing only )
  • Max. Opt Pressure: 500 PSIG ( applies to sensor portion only )
  • Standard Surface Finish: Code SF Maximum Ra of 32 u-in ( 0.8 um)
  • Pharmaceutical Surface Finish: Code F1 Per ASME BPE 2009 SF-1 20 u-in ( 0.5 um) Ra max. without electro polish
  • Pharmaceutical Surface Finish: Code F4 Per ASME BPE 2009 SF-4 15 u-in ( 0.4 um) Ra max. with electro polish
  • Input: RTD, type Pt100
  • Outputs: 4-20 mA loop powered, 2-wire, linear to temperature
  • Outputs: 0-5 Vdc, 1-5 Vdc, 0-10 Vdc all 3-wire, linear to temperature
  • Minimum Input Impedance: 1000 Ohm (of measuring device, for voltage output)
  • Power Supply: 12-32 VDC, polarity protected
  • Accuracy: +/- (.25 C + 0.40 % of span ) with one-point calibration
  • Accuracy: +/- (.10 C + 0.10% of calibrated span ) with two-point calibration
  • Sensor Open Circuit: Upscale 24 mA or Downscale 2.5 mA
  • Isolation: 500 VDC Input / Output
  • RFI Effect: 1% or less typical
  • Warm-up: 30 seconds

Engineering Specifications

  • Factory calibrated 4-20 mA output to a customer specified temperature range
  • Teflon insulation 4-conductor AWG 22 cable with SS Armor, 6 feet long (3M)
  • Operating temperature range of -50 to 200 Deg. C
  • Built-in, fully programmable, microprocessor based transmitter
  • Order MIST- PKIT to recalibrate to other temperature ranges
  • 1.5” and 2” hygienic clamp union sizes available ( Tri-Clamp )
  • Immersion lengths available are 2.5” and 4” and 6”
  • 1/4” probe diameter, stainless steel 316

Customer reviews

No reviews were found for Aysix - Model MIST Series - Sanitary Temperature Sensors. Be the first to review!