AMETEK MOCON - Baseline

- Model 9000 - Total Hydrocarbon Analyzer

From

0

The Baseline 9000 Hydrocarbon Analyzer is a microprocessor-based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The analyzer can be purchased in a variety of configurations with internal components for single or multi-point sampling (with or without a sample pump) for pre-filtered non-condensing samples.

Gaseous Hydrocarbon Analyzer

  • Unlimited applications
  • Accurate, continuous, detection
  • FlowGuard control of fuel, air, and sample with automatic shut-off
  • Graphical LCD display with easy to use menu

Detection limits down to < 10 ppb. User-programmable ranges from 1 ppm up to 100% as methane (CH4) are factory-configured per the customer’s application to facilitate installation and setup.

Using a Flame Ionization Detector (FID), AMETEK MOCON's FlowGuard electronic control regulates the delivery of fuel, air, and a small portion of the sample gas, to the FID. During the combustion process, organic or hydrocarbon-based gases in the sample are ionized, detected by the instrument, and then reported as a concentration. The automatic calibration feature enhances the long-term analytical stability of the instrument.

All instrument parameters are reported clearly and continually refreshed on a large, graphical LCD display. Using analog, digital, and logic output communication capabilities, analytical information from the analyzer can be acquired using an external PC and a simple communications program such as Windows® HyperTerminal or the analyzer can output binary or ASCII formats directly to a data acquisition system or PLC. Every Baseline 9000 analyzer includes AMETEK MOCON's free PC utility 9000 Keeper used for storing and uploading multiple methods, as well as sending configuration settings, directly to the analyzer.

Automated Control Features

  • Automatic FID ignition
  • FlowGuard control of fuel, air, and sample with automatic shut-off
  • Electronic back-pressure regulator with sample bypass system
  • Automatic calibration at user-defined intervals

Versatile Platform

  • Graphic LCD display with easy to use menu
  • Benchtop or rack-mountable
  • Single or multi-point sampling
  • Ethernet and serial customizable output
  • Programmable analog output ranges
  • Programmable relays for diagnostics, concentration, alarms, and events

Baseline 9000 Total Hydrocarbon Analyzer: Units

  • Detector: Flame Ionization (FID)
  • Ranges
    • User definable based upon calibration (as methane):
      • Very Low - 0.01 ppm to 200 ppm
      • Low - 0.1 ppm to 2,000ppm
      • Medium - 0.3 ppm to 20,000 ppm
      • High - 0.003% to 100%
  • Accuracy, Repeatability: ±1% full-scale
  • Drift, Zero: ±0.025% full-scale, 24 hours
  • Drift, Span: ±1% full-scale, 24 hours
  • Response Time: T90 < 5 seconds
  • Sampling: Internal single or multi-point, pump optional
  • Alarms: Multilevel concentration and fault alarms, audible and visual
  • Calibration: Programmable automatic or manual calibration
  • Support Gas Requirement
    • UHP Hydrogen (H2) - 35 cc/min
    • Zero Air - 175 cc/min
    • Span gas - methane is typical
    • Fuel blend options available
  • Display: Graphical LCD, 3.4” x 4.5” (8.64 cm x 11.43 cm)
  • Outputs, Standard
    • RS-232
    • LAN/Ethernet
    • Analog, 1 programmable 0-20mA/4-20mA isolated output
    • Relays, 5 programmable Form A relays rated to 3A @230VAC
  • Outputs, Optional
    • 3 additional Analog outputs
    • 5 additional Relays
  • Operating Temperature: 32 to 104°F (0 to 40°C)
  • Operating Humidity: 0 to 95% (non-condensing)
  • Configuration: Benchtop or 19” (48.3cm) rack-mount, 3U

Other Specifications (all models):

  • Physical Specifications
    • 5.25” H x 19” W x 16.25” D (13.02 cm x 48.26 cm x 41.28 cm)
    • <20 Lbs. (9.07 kg)
  • Electrical Requirements
    • Voltage: 100 - 240 VAC 50/60 Hz, 1 A

Preventive Maintenance Kit

  • Includes all parts potentially needed on-hand

Gas Generators

  • Hydrogen generators
  • Zero Air generators

Software

  • 9000 Keeper provided for method switching

Service & Support Options

  • Start-up and training, 1 day onsite

Environmental Monitoring

  • AMC in Cleanrooms
  • Air Quality Monitoring
  • Fugitive Emission Monitoring

Toxic Gas Monitoring

  • Indoor Air Quality
  • Leak Detection
  • OEM PID Sensors

Industrial Process Analysis & Control

  • Beverage Gas Monitoring
  • Industrial Gas Mixing Control
  • Process Gas Analysis
  • Specialty and Industrial Gas Monitoring
  • Surface Logging Analysis

Customer reviews

No reviews were found for Baseline - Model 9000 - Total Hydrocarbon Analyzer. Be the first to review!