AGF Environmental Industry Equipment Available In Grenada
-
Manufactured by AGF Manufacturing, Inc.based in USA
The AGF RiserPACK Model 8000 commercial riser is a pre-assembled floor control assembly for fire sprinkler systems meeting NFPA 13 requirements. A flow switch, TESTanDRAIN Model 2511, Model 7600 3-way universal valve, and a Model 7500 pressure gauge are assembled to a bronze or steel body. Available in sizes 1-1/4" to 6", orifice sizes K2.8 (3/8") - K25 and thread x thread, thread x groove, or ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Improve your building's appearance, meet NFPA Code, and proactively deter improper maintenance and vandalism of your auxiliary drains (drum drips). Auxiliary drains often become targets for vandals since most auxiliary drains do not provide standard protection against tampering. The COLLECTanDRAIN® Model 5100 provides a consistent and clean appearance and features our patented anti-trip plate ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Improve your building's appearance, meet NFPA Code, and proactively deter improper maintenance and vandalism of your auxiliary drains (drum drips). Auxiliary drains often become targets for vandals since most auxiliary drains do not provide standard protection against tampering. The COLLECTanDRAIN® Model 5200 provides a consistent, clean appearance and features our patented anti-trip plate ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Inspector'sTEST Model 3011BV is a 300 PSI rated ball valve designed to perform the remote inspector's test function on single-story and other applications with the benefit of locating the orifice ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's PURGEnVENT Model 7910 Manual Air Vent (MAV) is the most economical, purpose-built air vent on the market. The 1/2" ball valve features a mesh strainer and ball float to allow air to vent from the system while it is filling with water. The ball check prevents water from spilling out when it reaches the valve. For proper air venting, open the valve while the system is filling and close when ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Model 2500 Grooved is a compact 300 PSI rated single-handle ball valve that eliminates the connections of the traditional assembly loop. Model 2500 now has a port to add a drain line from a pressure relief valve. This TESTanDRAIN valve allows you can add a pressure relief valve without draining down the whole system. This model does not ship with a pressure relief valve--for included pressure ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The lightweight and compact Model 1011A is a 300 PSI rated single-handle ball valve with a pressure relief valve designed to provide both the test and express drain functions required for a wet fire sprinkler system. The Model 1011A ball valve eliminates the numerous connections required by the traditional assembly loop saving time, space, and money. The TESTanDRAIN Model 1011A features a ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Available with Galvanized or Black Steel and an Optional Water Detector Alarm. The Model 5300 COLLECTanDRAIN is a pre-assembled auxiliary drain (low point drain or drum drip) designed to meet NFPA 13 and 25 guidelines addressing proper drainage of a dry fire sprinkler system while offering easy identification and a consistent appearance with the integrated signage. Dual handles allow draining of ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Inspector'sTEST Model 3011SG with Sight Glass is a 300 PSI rated ball valve designed to perform the remote inspector's test function on single-story and other applications with the benefit of locating the orifice indoors. The sight glass option saves time witnessing flow from the exterior of the ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's RiserPACK Model 8011 commercial floor control assemblies meet NFPA 13 requirements and simplify installation with pre-assembled components. This model includes a flow switch, TESTanDRAIN Model 2511A with pressure relief valve and trim, Model 7600 3-way universal valve, and a Model 7500 pressure gauge. Available in a bronze or steel body, 2.8K (3/8") - 25K orifice, sizes 1-1/4" to 6", and ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The CORRinSITE is a corrosion monitor manufactured from the same mild carbon steel as the system's piping so its surface corrodes at the same rate as the pipe. When the monitor corrodes beyond its limit, moisture penetrates the sealed chamber and transforms the brilliant white sight glass to a fluorescent orange color indicating a corrosion problem and a need for further pipe inspection. The ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Model 2500 is a compact 300 PSI rated single-handle ball valve that eliminates the connections of the traditional assembly loop. Model 2500 now has a port to add a drain line from a pressure relief valve. With these TESTanDRAIN valves, you can add a pressure relief valve without draining down the whole system. This model does not ship with a pressure relief valve--for included pressure relief, ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's PURGEnVENT Model 7900 Automatic Air Vent (AAV) is a 1" isolation ball valve, barrel strainer, air vent, and purge valve that helps prevent corrosion by automatically releasing trapped air in wet fire sprinkler systems. It meets NFPA 13 code that requires a single air vent on each wet pipe sprinkler system utilizing metallic pipe. The patented design automatically vents air without leaking, ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Inspector'sTEST Model 3011ASG is a 300 PSI rated ball valve designed to perform the remote inspector's test function on single-story and other applications with the benefit of locating the orifice indoors. The Inspector'sTEST Model 3011ASG includes a sight glass as well as a Model 7000 Pressure Relief Valve with drainage piping. It complies with the requirements of NFPA 13 for the ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF’s TESTanDRAIN Model 2511T is a 300 PSI rated single-handed ball valve designed to provide both the test and express drain functions for a wet fire sprinkler system. It saves time, space, and money by eliminating the numerous connections required by the traditional assembly loop. Model 2511T features a tamper-resistant test orifice and sight glass, a tapped port for system access, a pressure ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Commercial RiserPACK Model 8611 is a riser assembly for NFPA 13 fire sprinkler systems and designed to fit into a corner to minimize protruding and comply with ADA Standards. The Model 8000 includes a flow switch, TESTanDRAIN Model 1011A with included pressure relief valve and trim, Model 7600 3-way Universal Valve, and a Model 7500 Pressure Gauge. Available with a steel body in sizes 2"-6", ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Every benefit of the Model 5400 with AUTOMATED operation! The AGF COLLECTanDRAIN® Model 5500 is a fully automated auxiliary drain that features automatic supply and drain valves that operate according to draining provisions required by NFPA 25. The Model 5500 can be operated on-demand by the push of a button (locally or remotely) or by its hands-free, fully automatic mode which will operate ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The AGF Universal pressure relief kit allows pressure relief valve to be added on 1-1/4" - 6" RiserPACK models. Comes standard with 175 PSI. Other PSI available: 165, 185, 195, 205, 225, ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Inspector'sTEST Model 3011A includes a Model 7000 Pressure Relief Valve and drainage piping and complies with the requirements of NFPA 13 for the installation of a pressure relief valve on all gridded systems and downstream of all pressure reducing ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's RiserPACK Model 8000 is a pre-assembled, residential floor control assembly that meets the requirements of NFPA 13R for fire sprinkler systems. Pre-assembled components include a flow switch, Inspector'sTEST Model 3011BV, 3-way universal valve, and a Model 7500 pressure gauge. Available in sizes ranging 1-1/4" to 2", orifice sizes from 3/8" (K2.8) - 5/8 ELO (K11.2), and thread x thread, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you