Gamma Meccanica Environmental Industry Equipment Available In Latvia
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The forming chamber is a part of the plant where the glass wool fiber produced on fiberizer is collected. This machine consists of perforated horizontal flight conveyor (from which is sucked a big quantity of air). Two vertical longitudinal contrarotating belt conveyors form two side walls of the chamber. Two further belt conveyors form 2 walls of the chamber (anterior and posterior). These ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The crimping machine is the special unit for fiber orientation, installed before the curing oven. By acting on the orientation of the fibers the crimping improves the mechanical characteristics of the final product. The vertical fiber orientation causes the high mechanical compressive strength and delamination strength. The tensile strength in the direction of the thickness increases from 5 to 10 ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The fiberizer is installed under the feeder. The melted glass, opportunely dosed through special openings (bushing), electroheated and cooled, arrives to the fiberizers that essentially consist of perforated disc that rotates at high speed and is thermoheated. Due to the centrifuge force, the glass is pushed through the perforated disc openings (using compressed air and combustion gas of special ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The roll up machine is the unit that rolls up automatically the mattresses or the felt. The roll up machine can be equipped with a system of precompression which compresses the felt up to a required value before the phase of rolling up begins. The machine wraps automatically the roll from the outside with a plastic film or paper. So the roll is being sealed, preventing rollout. A special ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The packaging unit is the last step of the production process. Gamma Meccanica S.p.A. proposes different packaging systems so to respond to the client’s needs. The packs are wrapped up with polyethylene and thermoshrinked when they come out from the stacker. During the packaging the packs, depending on the density, can be compressed, reducing its volume, so reducing the transportation ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The TANDEM technology applied to the recycling of heavily printed, contaminated and high humidity plastic materials guarantees the excellent quality of the granule with a notable energy savings in comparison with conventional recycling systems that foresee the re-extrusion of the material. The plant is composed of a COMPAC unit and two extruders arranged in succession. The short, non-vented ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The capacity of the line for the production of extruded polystyrene XPS boards can vary from 300 to 1500 kg/h, equivalent to 70000-300000 m³ / ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The conventional regeneration lines are ideal for the recycling of plastics that foresee the use of a granulator. It can be also equipped with our FORCE FEED system complete with storage silo, single or dual auger configuration for ground rigid materials, film and foam flake. This type of line is available in different models depending on the production capacity. Every line can be customized upon ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The pelletizer system completes the recycling process: this is the final part of the plant. The recycled material comes out of the die plate in form of “spaghetti” and it is “cut” by a series of rotating blades into small cylinders which are cooled with water and then dried in a centrifuge. During this stage, the material takes on the form of a ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The blowing agents are one of the main components used in the extrusion process. Gamma Meccanica S.p.A. lines are able to use all blowing agents present on the market: CO2, Ethanol, Butane, Dme, HFA, Other blowing agents. The percentages of use can be based on customer request to optimize the capacity of the line, the costs and the characteristics of the final ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
Ceiling tiles market in the last years grow up and changed is trend: the old standard ceiling tiles panel (made by a mix of cement and fiber) are now replaced by a new generation product (made by mineral wool) more easy to produce and effective as thermal and acoustic insulation , preserving the Aesthetics & Design. For this reason Gamma Meccanica propose this line: easy to install and ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The stitched mattresses production line is designed to treat the rock wool felts produced on the main line. The stitched mattresses consist of a rock wool felt stitched on a support. They are mainly used for the insulation of cylindrical surfaces (pipes, ducts, tanks), conical and in general for wide surfaces of irregular form. The production of stitched mattresses foresees the application of a ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The forming chamber is the part of the plant downstream from the spining machine where the fiber is collected to form the material that in jargon is called “primary felt”: the fibers are blown away from the spining machine and separated from the heavy parts (shots), are sprayed with a binder (phenolic, acrylic or ecological resin), then deposited through vacuum action on a special ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
Function of ECO CLEAN: Eco Clean removes the ink deposited by the printing machines on the plastic films for packaging, making the recycling of the printed films more profitable. The result of the innovative process is a film completely cleaned from ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
Gamma Meccanica S.p.A. developed a special crimping machine for glass wool which allows to improve the mechanical characteristics of the product, acting directly on the fiber orientation. This system was realised on the basis of the requests and in cooperation with some important manufacturers of glass wool. The crimping machine for glass wool is able to vertically orientate the wool fiber so as ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The packaging unit is the last step of the production process. Gamma Meccanica S.p.A. proposes different packaging systems so to respond to the client’s needs. The packs are wrapped up with polyethylene and thermoshrinked when they come out from the stacker. During the packaging the packs, depending on the density, can be compressed, reducing its volume, so reducing the transportation ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The purpose of the curing oven is to polymerize binding agents (like resin of different ones) previously mixed with the fiber in the fiberizing zone; moreover during the curing process the felt receives its final ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The curing oven is used for the polymerization of the binder contained in the felt, by hot air, in order to give to the final product its density and shape. Gamma Meccanica S.p.A. has developed a new curing oven to polymerize the felt on rock wool production lines, completely redesigned to improve the maintenance and increase the efficiency of the machine (reducing the consumption of ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The system to recover production waste of Gamma Meccanica S.p.A., has as its main aim to improve the general efficiency of the production line (economic advantage), recovering and recycling all the waste of fiber of the plant. The waste recovery allows to send the edges produced during the trimming and grinding directly to the forming chamber or alternatively to a storage silo. The storage silo ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
Thanks to new developments in the processing of plastic materials Gamma Meccanica produced the underwater pelletizer, which allows the granulation of plastic materials with high MFI (such as PET, Nylon, etc) and low viscosity that cannot be processed with conventional ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you