+GF+ Signet Environmental Industry Equipment Available In Bosnia & Herzegovina
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Operating range: 0.3 to 6 m/s, 1 to 20 ft/s. Installs into pipe sizes: DN15 to DN900, 0.5 to 36 in. Max Pressure rating: PP 12.5 bar @ 20 °C, 180 psi @ 68 °F PVDF 14 bar @ 20 °C, 200 psi @ 68 °F. Power source: Self powered. Rotor: PVDF. Compatibility: 5090, 8150, 8550, 8900, 9900, 9900-1BC. *Only Signet installation ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Signet Conductivity/Resistivity electrodes are designed to provide versatile installation and accurate sensing across a very broad dynamic range. These electrodes are built with a controlled surface finish to ensure accuracy and repeatability. The standard electrode is constructed 316 SS or Titanium, but there are other materials available for maximum chemical compatibility. Reversible threads or ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Conductivity/Resistivity: Accepts any cell constant. Compatible with all Signet Conductivity Sensors. Output choices include digital (S3L) for use with the Signet 8900, 9900, 9950 or 4 to 20mA. Compatible with Signet Instrument Type 8900 or instruments accepting a 4 to 20mA output. Single or dual input available for remote mount version (S3L) ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 2537 Flow Sensor is the next generation in fluid measurement technology from the inventor of the original paddlewheel flowmeter. This sensor is an enhancement on what's already an industry standard. It has the added functionality of various output options including flow switch, pulse divider, digital (S3L) or 4 to 20 mA. Additionally, it offers low flow, low power and high resolution ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 8850 Conductivity/Resistivity Transmitter is designed for multiple installation capabilities, simple set-up and easy operation, thus satisfying a broad range of application requirements. Full microprocessor based electronics allow for a wide operating range and long term signal stability in three different instrument versions: the 8850-1 for a traditional two-wire current loop, the ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Connection: Durable DryLoc with fold plated connections. Compatible Sensors: 2724 - 2726, 2734 - 2736, 2756 - 2757 Wet-Tap, 2764 - 2767, 2774 - 2777. Compatible Instruments: Signet 8900 or 9900. Additional Features: Options for S3L and 4 - 20 mA outputs. Mounting sytles: In-line integral mount and ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 9900-1BC Batch Controller system provides control capability and process fine-tuning in a familiar package. The programming interface uses a fourbutton keypad and an intuitive menu for adjusting a batching system to the best performance possible. Choose between simple or advanced modes. In simple mode, relay outputs can be used for batching, external counter, missing signal alarm and 4 ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Engineered specifically for small diameter applications, the Signet 2100 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 5800 ProPoint™ Conductivity Monitor features a unique analog/ digital display, making it the preferred measurement instrument for applications requiring routine monitoring. The digital display guides the user through the simple menu system and provides precision information, while the analog dial serves as a quick, at-a-glance indicator of the measurement process. The 5800CR ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 525 Metalex Paddlewheel Flow Sensor combines stainless steel construction with insertion paddlewheel technology. The result is a highly reliable sensor suitable for operating at extreme pressures and temperatures. The Tungsten Carbide shaft and carbon fiber reinforced bearing provides excellent wear resistance for for extended ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Simple to install with time honored reliable performance, Model 515 Rotor-X paddlewheel flow sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The output signal of the Model 515 is a sinusoidal frequency capable of driving a self-powered flowmeter (Model 5090). The wide dynamic flow range of 0.3 to 6 m/s (1 to 20 ft/s) allows the sensor to ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The 2450 Pressure Sensor has a one-piece injection molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids. Three pressure versions allow for optimal resolution matched to your sensing needs. Solid state circuitry eliminates drift (no internal ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
+GF+ SIGNET 8250 Level Transmitters are compatible with a variety of continuous level sensor types including Pressure, Magnetostrictive and non-contacting Ultrasonic. They are also available in field and panel mount configurations, single or dual-channel input and equipped with one 4 to 20mA output for each input channel. The unit also features two relays, plus the ability to support two ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 5900 Salinity Monitor utilizes conductivity sensors to provide direct reading, including calibration, of salinity in parts per thousand [PPT]. Equipped with a scaleable A to 20 mA output and two programmable relays, the monitor requires 12 to 24. Volts, AC or DC, and is compatible with Signet 10 cm-1 or 20 cm"' conductivity cells. Temperature is selectable for display in either °C ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 2551 Magmeter is an insertion-style magnetic flow sensor that features no moving parts. The patented* sensor design is available in corrosion-resistant materials to provide long-term reliability with minimal maintenance costs. Material options include PP with stainless steel, PVDF with Hastelloy-C, or PVDF with Titanium. Utilizing the comprehensive line of Signet installation fittings, ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 5700 pH/ORP Monitor is a versatile and intelligent instrument that recognizes the type of sensor connected, either pH or ORP, then automatically sets itself for the corresponding display and functionality. Also, during EasyCal operation, the monitor automatically recognizes standard buffers/test solutions, thereby shortening and simplifying routine calibration procedures. Two ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 2540 Paddlewheel flow sensor offers the strength and corrosion resistance of stainless steel for liquid applications with low velocity measurements. Unique internal circuitry eliminates the need for magnets in the process fluid, enabling flow measurement of 0.1 to 6 m/s (0.3 to 20 ft/s) while maintaining the advantages of insertion sensor design. Ultraflon 500C bearings and Tungsten ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet 2540 Paddlewheel flow sensor offers the strength and corrosion resistance of stainless steel for liquid applications with low velocity measurements. Unique internal circuitry eliminates the need for magnets in the process fluid, enabling flow measurement of 0.1 to 6 m/s (0.3 to 20 ft/s) while maintaining the advantages of insertion sensor design. Ultraflon 500C bearings and Tungsten ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
Simple to install with time honored reliable performance, Signet 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The Model 2536 has a process-ready open collector signal with a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s). The sensor measures liquid flow rates in full pipes and can be used in low ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you