Norsonic Environmental Industry Equipment Available In Bosnia & Herzegovina
-
Manufactured by Norsonic ASbased in NORWAY
A general purpose Class 1 Sound Level Meter mainly designed for advanced noise assessments and noise logging, featuring event triggered sound recording and markers. The Nor139 may optionally be fitted with 1/1- and 1/3-octave filters capable of logging multispectra with a vast number of measurement parameters with a time resolution of from 100ms and on. Fitted with removable SD-card for easy to ...
-
Manufactured by Norsonic ASbased in NORWAY
The precision vibration meters Nor133 and Nor136 are designed in accordance with ISO 8041. In their basic versions, both meters are well suited for measurement of whole body and hand-arm vibration measurements. Optional upgrades allow for the measurement and analysis as vibration in buildings, ships, vehicles and public transport systems in accordance to international and national ...
-
Manufactured by Norsonic ASbased in NORWAY
The Nor150 a sound level meter sets new standards in user-friendliness featuring the largest colour touchscreen in a handheld meter on the market today, The update is a free update, except for customers having NorReview older than V6. Nor150 V2.0 and V2.1 requires NorReview V6 to support the new marker storage format, profile B and profile moving. Featuring a large 4.3” true colour ...
-
Manufactured by Norsonic ASbased in NORWAY
Norsonic offers a wide range of solutions for Environmental Noise Monitoring; from stand-alone Noise Monitoring Terminals (NMT) with local or remote access, to large scaled hosted systems with several NMTs fully automated which deliver daily reports with noise data and meteorological data to the ...
-
Manufactured by Norsonic ASbased in NORWAY
½” free-field, high sensitivity self-polarised microphone for use in applications where environmental or safety considerations do not permit the use of 200-volt polarisation supplies, or as a general IEC 61672 Class 1 microphone in sound level meters with no polarisation ...
-
Manufactured by Norsonic ASbased in NORWAY
The Nor1216 is a measurement microphone for all-weather conditions designed for use with the Nor140/Nor150. It features SysCheck verification and a heated preamplifier. It is intended for permanent outdoor applications. ...
-
Manufactured by Norsonic ASbased in NORWAY
Norsonic has developed a range of windscreens in different sizes and shapes dependent on the application they are intended for. All windscreens are made from open cell polyurethane ...
-
Manufactured by Norsonic ASbased in NORWAY
The microphone preamplifier Nor1209 has been designed for general use with most 1/2″ condenser microphone of type WS2 or LS2 according to IEC 61094-4: Measurement microphones – Part 4: Specifications for working standard ...
-
Manufactured by Norsonic ASbased in NORWAY
The triaxial accelerometer Nor1288 is designed for general vibration measurements and as a reference accelerometer when conducting whole body measurements using the 6 channel vibration meter Nor136. The Nor1288 is then mounted on the vehicle itself and the corrolation between the vehicle vibrations and the drivers seat can be ...
-
Manufactured by Norsonic ASbased in NORWAY
The triaxial geophone Nor1292 is a sensitive transducer for vibration velocity based on a rugged geophone construction used by seismologists and geophysicists for decades. One main application is for the measurement of vibrations in buildings. The frequency response is essentially flat from the resonance frequency 4,5 Hz and up to at least 500 Hz. However, by using the frequency compensation ...
-
Manufactured by Norsonic ASbased in NORWAY
Nor4557 Mounting magnet with 4mm thread for use with Nor1288 triaxial accelerometer. Base diameter 30mm. The Rare-earth magnet material ensures a high magnet mounting ...
-
Manufactured by Norsonic ASbased in NORWAY
Calibrator Adaptor for use with 1″ calibrator or pistonphone for calibrating the Outdoor Microphone Nor1210 A and Nor1210 C. Please note that the Nor1210 C version with serial numbers higher than 15177 should use Calibrator Adaptor Nor1482. It is recommended to use calibrator Nor1253/250Hz-124dB for calibration, since this calibrator is less sensitive to changes in load volume compared to a ...
-
Manufactured by Norsonic ASbased in NORWAY
Calibrator adaptor for use with 1″ calibrator or pistonphone for calibrating the outdoor microphone Nor1210 C version with serial numbers higher than 15177. Microphones with serial numbers lower than 15177 should use Calibrator Adaptor Nor1470. It is recommended to use calibrator Nor1253/250Hz-124dB for calibration, since this calibrator is less sensitive to changes in load volume compared ...
-
Manufactured by Norsonic ASbased in NORWAY
The dual channel case Nor518 is developed mainly for dual channel building acoustic measurements. The case has precut foam for two Nor140 and space for a laptop running NorBuild and CtrlBuild control and reporting ...
-
Manufactured by Norsonic ASbased in NORWAY
Carrying case in nylon with room for Sound Analyser Nor140, calibrator, and accessories. The case is normally included in Nor140 deliveries. The case may also be used for the Nor13x range of instruments. ...
-
Manufactured by Norsonic ASbased in NORWAY
Holder for 1/2″ preamplifiers. Holds the preamplifier in upright position. Typical use is in calibration laboratories when calibrating ...
-
Manufactured by Norsonic ASbased in NORWAY
Power supply adaptor for pistonphone B&K 4228 / 4220 for switching the pistonphone on/off automatically from the Nor483B test unit when calibrating microphones using ...
-
Manufactured by Norsonic ASbased in NORWAY
Cable with 3.5mm stereo minijack to 2x BNC (for use with microphone frontend ...
-
Manufactured by Norsonic ASbased in NORWAY
Cable (2m) for connecting a standard telephone modem with 25 pin socket to RS-232 interface on sound analyser Nor140 ...
-
Manufactured by Norsonic ASbased in NORWAY
Interface cable, 2 meters, for connecting the RS-232 and AC output of a Nor140 (Nor118) to a Siemens TC35i GSM modem. Allows data transfer and analogue signal transfer via a GSM modem. Please note that the Nor4518 is replaced by Nor4518A. The A version is needed for use with the Nor140, and works for both instruments. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you