STS Environmental Industry Equipment
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS CM11 simulator is a fully functioning real Thermo CM11 that has been modified for use in nuclear contamination training. The unit retains its full range of functions but has additional electronics inside the meter and operates with a simulated STS BP19/DP11 style probe. The monitor which is used for verification of decontamination and identification of contaminated hands and clothing is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 43-5 is a real Ludlum probe, but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
In developing the STS Siloxane monitor the STS design team had to come up with a simple, cost effective but accurate method to measure Siloxane contamination in a gas stream which had many constituents and a high methane content making direct measurements difficult. The system also had to be robust enough to use on line in the field and small enough to fit into a 19" rack housing. The teams ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
STS produce ultra fine platinum wire assemblies for use in both our own and other manufacturers detection units. Fine platinum wires (down to 10 micron) are welded onto detection assemblies to produce a corona discharge sensor. STS fine wire products include Corona Point Assemblies, Wire Wound components and Strain Gauges. Corona Point Assemblies: STS manufacture Corona Point detectors which are ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Dosi-Safe simulator is a simulated generic Electronic Personal Dosimeter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the accumulation of dose over time without exposure to radiation. The instrument operates using an STS radio frequency detection system which detects the presence of a simulated radiation field with the resultant ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is a self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 to 15 hours of operation. The probe is designed to replicate the particular properties of radioactive ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Semi-Portable monitor is a variant on the fully installed GRP package. The monitor itself is identical to the fixed monitor but it is housed in a more portable wheeled pelicase enclosure. This package lends itself to be moved between sites where shorter term monitoring can be carried out to establish the status of carbon filters. This means that users who may have smaller filters where a ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
STS have worked in collaboration with many institutions over its 25+ years many of whom have developed a technically great idea but cannot move it easily from the drawing board or test lab to a marketable product. One such development was the use of fluorescence to detect a chemical that could be used as a surrogate for BOD (biological oxygen demand) a universally accepted indicator of organic ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 100 mbar … 1000 bar. Accuracy: ≤ ± 0.50 / 0.25 % FS. Operating temperature: -40 … 125°C. Process temperature: -40 … 50°C. Outp t signal: mV. Materials: Stainless steel, ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 1 … 250 mH2O. Accuracy: ≤ ± 0.25 % FS. Total Error Band: ≤ ± 0.70 %FS (-5 … 50°C). Operating temperature: -5 … 80°C. Process temperature: -5 … 80°C. Output signal: 0 … 5 / 0 … 10 VDC, 4 … 20 mA.Materials: Stainless ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 1…250 mH2O. Accuracy: ≤ ± 0.50 / 0.25 % FS. Operating temperature: -5…80 °C. Process temperature: -5…80 °C. Output signal: mV. Materials: Stainless steel, ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
ATM.1ST/Ex - High Precision Transmitter. Pressure measuring range: 100 mbar … 1000 bar. Accuracy: ≤ ± 0.10 / 0.05 % FS. Operating temperature: -40 … 125°C. Process temperature: -40 … 150°C. Output signal: 4 … 20 mA. Total Error Band: ≤ ± 0.30 %FS (0…70 °C). Materials: Stainless steel, ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 100 mbar…1000 bar. Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS. Temperature measuring range: -50…150 °C. Operating temperature: -25…85 °C. Process temperature: -40…150 °C. 2 Output signals (p & T): 0…10 V DC, 0…20 / 4…20 mA. Materials: Stainless steel, ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 100 mbar … 25 bar. Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS. Operating temperature: -25 … 85°C. Process temperature: -25 … 100°C. Output signal: 4 … 20 mA. Materials: Stainless ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 5…250 mH2O. Accuracy: ≤ ± 0.25 / 0.10 % FS. Temperature measuring range: -25…85 °C. Operating temperature: -5…50 °C. Process temperature: -5…50 °C. Interface: SDI-12 (V1.3). Materials: Stainless steel, Titanium. Feature: Recalibration possible, Adjustable ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 100 mbar … 1000 bar. Accuracy: ≤ ± 0.10 / 0.05 % FS. Operating temperature: -40 … 125°C. Process temperature: -40 … 150°C. Output signal: 0 … 5 / 0 … 10 VDC, 4 … 20 mA. Total Error Band: ≤ ± 0.30 %FS (0 … 70°C). Process connection: G 1/4 F, 1/4 NPT, 1/2 NPT, G 1/4 M, G1/2 M. Materials: ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 100 mbar … 690 bar. Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS. Operating temperature: -25 … 85°C. Process temperature: -40 … 150°C. Output signal: 4 … 20 mA. Materials: Stainless steel, ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 100 mbar… 25 bar. Accuracy: ≤ ± 0.25 / 0.10 % FS. Temperature measuring range: -50… 150°C. Operating temperature: -40… 125°C. Process temperature: -40… 150°C. Output signal: 4… 20 ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Certificate: ATEX & IECEx. Pressure measuring range: 1…250 mH2O. Accuracy: ≤ ± 0.10 % FS. Total Error Band: ≤ ± 0.30 %FS (-5…50 °C). Operating temperature: -5…80 °C. Process temperature: -5…80 °C. Output signal: 4…20 mA. Materials: Stainless steel, ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 1…250 mH2O. Accuracy: ≤ ± 0.50 / 0.25 % FS. Operating temperature: -5…80 °C. Process temperature: -5…80 °C. Output signal: mV. Materials: Stainless steel, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you