C&G - Model Scraper Series - Vacuum Wastewater Evaporators
From Wastewater Treatment / Industrial Vacuum Wastewater Evaporators
-
Most popular related searches
Your Waste Water Our Solution
C&G Depurazione Industriale Sri has been operating since 1971 in the industrial wastewater treatment sector. The Know-how acquired from the design and construction of over 3000 plants, sold both in Italy and abroad, encourages our constant growth, research and innovation, and allows us to propose a complete and personalised service to our customers.
Countries where the C&G logo is already well known and appreciated are: Italy. France. Belgium. Spain. Holland. Slovakia. Slovenia. Poland. Turkey. Greece. Russia. Lebanon. UAE. USA. Mexico. Taiwan, China. India. Indonesia. Malaysia. Japan. Brazil and others.
C&G supplies equipment and support technologies to a wide range of production sectors, all however with a common objective: to improve the conditions of a particular liquid.
C&G offers a wide range of products, all conforming to existing guidelines of the EEC:
- Vacuum evaporators
- Reverse osmosis
- Ultrafiltration
- Ion exchange
- Chemical-physical treatment
- Water-softeners
- Demineralizrs
- Filterpress
- Special equipment for galvanic industry
The services offered by C&G include:
- Custom made, one-off solutions
- Analysis in our laboratory of your polluted waters
- Design, manufacture and installation
- Maintenance contracts
- On-line and on-site assistance
General Working
Refrigerant circuit
The Scraper evaporator series are plants which use a heat-pump. There is a refrigerant circuit where high pressure is used to yield heat to the wastewater and bring it to boil, and low pressure is used to re-condense the distillate produced by removing the heat.
The high pressure line passes within a shell placed outside the boiling chamber so that it does not interfere with the scraper itself.
Vacuum circuit
A vacuum is created within the boiling chamber through the use of a liquid ring vacuum pump and an ejector.
This extraction system guarantees a residual pressure of 33 mbar inside the evaporator.
Distillate circuit
The discharge of the distillate is independent. There is an accumulation tank placed on the skid which is continuously discharged using an apposite centrifuge pump.
Concentrate circuit
This type of plant allows the process of concentration to be pushed further, until a dry solution is obtained which is no longer possible to extract using a pump.
Discharge of the concentrated product is manual using a manual ball valve on the base of the chamber, and helped by the movement of the scraper, which has a different design for this scope, near the discharge valve itself.
Possibility of installation of a suitable automatic discharge pump following client request.
Automation, alarms and control
C&G evaporators can work unattended and continuously 24/24 hours thanks to control through PLC.
The use of simple, logical software allows easy control and immediate set up of the working parameters.
The use of a synoptic (standard from model V-NT 1000 up) guarantees a rapid and intuitive global control of the working of the machine.
Application Sectors
- Galvanic
- Photographic
- Mechanic
- Cosmetic
- Chemical
- Petrochemical
- Pharmaceutical
- Oenological
- Dairy
- Olive oil
Accessories and Services Offered:
- Conductivity meter
- Installation on site
- Start-up
- Maintenance
- Fan-speed control
- Distance control
- Measurement of production
Customer reviews
No reviews were found for C&G - Model Scraper Series - Vacuum Wastewater Evaporators. Be the first to review!