CEB - Model EW 80 - High Pressure Washing Machine for Open Top Wheeled Containers
From Machines with Washing Head
Machine for open top wheeled containers, IBCs in HDPE and in stainless steel. Required the presence of a lower discharge valve from 1.5″ to 3″.
Products Details
Models /S (ATEX certificates)
Two-phase solvent cycle (washing and rinsing)
Models / A
Cycle with water and / with detergent in three phases (prewash, wash and rinse).
possible cycles: Eco – Standard – Long.
- Average cycle time: 3 to 5 minutes (excluding loading and unloading)
- Available with AISI 304 micro shot peening stainless steel structure and with grated grid for waste water collection.
- Combination with EWEC or EWEC2 for drum washing.
Washing with open or closed cycle (with 2 or more tanks for washing and rinsing liquids).
-
Cycle with solvent vapor containment (in closed cabin)
-
Possibility of using hot water up to 40° (max 400 bar) and 70° (max 250 bar) with insulated tanks.
-
Washing with detergent
-
Washing with sanitizing
-
Blowing
-
External washing of the containers (with external station).
-
Washing of conical trunk containers with valve on the bottom (in a closed cabin in 4 phases – washing, washing, washing of the bottom and rinsing valve)
-
IBC drying (with additional unit)
-
Test for micro-cracks check of IBCs in HDPE (with additional external unit)
Customer reviews
No reviews were found for CEB - Model EW 80 - High Pressure Washing Machine for Open Top Wheeled Containers. Be the first to review!