Rapid Filter Inc.

Rapid Filter Inc.

- Carbon Wound Cartridges

0
RapidFilter carbon cartridges are a one-step carbon and filtration treatment. These cartridges eliminate the problems associated with loose carbon treatment and the need for a separate filtration system. The standard cartridges measure 2 1/2' OD with lengths varying from 4' to 40' with flow rates up to 2 %2 gpm. These cartridges are designed to be used in either single or multi-tube vessels.

  • Organic Impurity Removal
  • Non-Contaminating
  • Carbon Cartridges
  • High Grade Activated Carbon
  • Standard Filter Cartridge Replacement

Recommended for:

  • Amines, Glycol, Sulfanols
  • Aromatic Compounds
  • Clarity Improvement
  • Water Purification
  • High Molecule Weight Alcohol Cooling
  • Tower Treatment
  • Vending Machines
  • Color Removal
  • Beverages
  • Photographic
  • Drinking Water
  • Dechlorinating
  • Waste Water
  • Plating Solutions
  • Benzene/Toluene
  • Oil Removal
  • PCB's

  • Removal of Free Chlorine
  • Removal of Foul Tastes, Odors, Colors
  • Volatile Organic Chemical Removal (VOC'S)
  • Sediment Removal
  • Purification of Plating and Photo Processing Solutions
  • Waste Water Treatment
  • Process Water Recycling

  • A. Several Factors affecting life and efficiency are:
    • Particulate load in fluid
    • Type and amount of contaminant to be dissolved
    • Flow rate, temperature, and pH of fluid
    • Single pass or recirculation system
    • Contact time with wash. Steady or intermittent use.
  • Impregnated carbon is used to purify, deodorize and upgrade quality of liquids.
  • Early in the system it removes contaminants or it is used as a final step to improve product quality. Impregnated carbon prefers chemical with low solubility low polarity and a low degree of ionization.
  • Single pass applications should employ molded activated powder; impregnated carbon or paper impregnated activated powder carbon cartridges.
  • Series filtration utilizing a string wound particulate filter upstream of the carbon cartridge will increase the carbon cartridge life immensely.
  • Sizing based on contact time. Longer contact time results in higher absorption.
  • Higher than recommended flow rates can be employed, but removal efficiency may be sacrificed. The lower the GPM flow rates, the greater the efficiency of the carbon cartridge. We recommend a maximum of 2 %2 GPM per 10' cartridge length

Customer reviews

No reviews were found for RapidFilte - Carbon Wound Cartridges. Be the first to review!