F & Q Pumps, Inc.

F & Q Pumps, Inc.

Model CFE40 - Effluent Pump

From

0

This high-performance sump/effluent pump is goods for Effluent and Wastewater removal, Sump Drainage, Water Transfer, ect.

  • 4/10 HP
  • Class 30 cast iron construction
  • 1-1/2”NPT discharge, Vertical
  • Single mechanical, Silicon Carbide, 300 series Stainless Steel Parts
  • Oil-filled motor with automatic reset overload provides safe operation
  • Ball bearing construction for long life
  • Automatic float switch (Optional, Model 'A')

  • Discharge - 1-1/ 2' NPT. Vertical
  • Solids Handling 3/8' (10mm)
  • Liquid Temperature 104 Degrees F. Contiuous
  • Motor Housing Cast Iron
  • Volute Cast Iron
  • Seal Plate Cast Iron
  • Impeller Cast Iron, 10 Vane, Vortex  
  • Shaft Stainless Steel
  • Bearing (Upper & Lower) Single Row, Ball, Oil Lubricated
  • Hardware 300 Series Stainless Steel
  • Square Rings Buna-N
  • Power Cord 20ft quick disconnect cord w/plug on 120 volt, pressure grommet for sealing and strain relief. U/L and CSA listed 14AWG Type SJTOW
  • Motor (Single Phase)
    • 3450 RPM, 60Hz, 115 Volts
    • Nema L Includes Overload Protection In The Motor.
    • Oil Filled, Class B
    • Permanent Split Capacitor
  • Size 9' X 7 ' X 13 '

Customer reviews

No reviews were found for Model CFE40 - Effluent Pump. Be the first to review!