CL Solutions, LLC

- Model CL-Out - Rapid Bioremediation

0

CL-Out has been used throughout the USA and Canada, with example contamination concentrations reduced from greater than 10,000 ppb to less than 5 ppb. Site closure often occurs in a matter of weeks or months versus several years or more for other methods, giving users the combined benefit of fast site closure and remarkable cost savings.

  • Highly-concentrated solution of live, strains of lyophilized (freeze-dried) Pseudomonas organisms that occur naturally in the earth’s ecosystem.
  • Cultures are free of pathogens and there is no artificial mutation or genetic engineering involved.
  • “Hungry bacteria®” with only one purpose in life: to seek and destroy contaminated waste at its source, and then quickly convert it into harmless, naturally recyclable by-products.
  • Specifically designed for ex situ or in situ bioremediation.
  • Available as a ready-to-use liquid or as a freeze-dried powder.
  • Can be used as a highly effective stand-alone decontamination solution or..
  • Powerful augmentation to speed the remediation of existing treatment systems.

Instructions for freeze-dried powder:
  1. The CL-Out arrives in drum liner bottle bags packed in dry ice. Keep the product on dry ice or in a freezer until ready to use. If kept frozen, the product is stable for up to one year.
  2. On the day prior to inoculation, place each bottle bag in a separate 55-gallon drum. Open the bottle-bag bung and fill the bags with approximately 50 gallons of clean tap water. Note: Be sure to pull the slack from the bag above the drum rim for future use. Keep the full bags (inside the drums) at room temperature for the next 24 hours.
  3. After 24 hours, inoculate the wells. Cut open the top of the bottle bag with a utility knife and fold the drum liner over the top rim of the drum. Add 50 pounds of dextrose to each drum of CL-Out. Stir the solution to completely dissolve the dextrose.
  4. Once the dextrose has dissolved, place a submersible pump, with hose attached, into the drum of CL-Out and attach the hose to the wellhead. A Webco rubber fitting or PVC bushings may be used to secure the hose to the wellhead.
  5. After the inoculation is complete, to prevent biofouling in the wells, pour or pump fresh water into the wellhead to clean the CL-Out/dextrose solution out of the well screen.
Instructions for liquid:
  1. The CL-Out arrives in concentrated liquid form (or premixed in a 55-gallon drum).
  2. Keep the containers at room temperature until ready to use. The product is stable for up to six months at room temperature.
  3. Add 50 pounds of dextrose to each drum of CL-Out. Stir the solution to completely dissolve the dextrose.
  4. Once the dextrose has dissolved, place a submersible pump, with hose attached, into the drum of CL-Out and attach the hose to the wellhead. A Webco rubber fitting or PVC bushings may be used to secure the hose to the wellhead.
  5. After the inoculation is complete, to prevent biofouling in the wells, pour or pump fresh water into the wellhead to clean the CL-Out/dextrose solution out of the well screen.
- See more at: http://www.cl-solutions.com/web/cl-out-application-instructions.html#sthash.FFXn8YF4.dpuf

Customer reviews

No reviews were found for CL Solutions - Model CL-Out - Rapid Bioremediation. Be the first to review!