Innomar Technologie GmbH

- Model SES-2000 - Sub Bottom Profiler

0

The 'Innomar SES-2000 compact' model is the smallest member of the 'Innomar SES-2000' sub-bottom profiler family. It was designed for inshore surveys in shallow-water down to 400 metres water depth, but can also be used in coastal areas.

Because of its small size and weght this system is convenient even on the smallest boat. Controlled via Ethernet using any Windows based PC or laptop it is a user friendly and affordable design, too.

The 'Innomar SES-2000 compact' model acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.

Included Features

  • SLF full waveform data acquisition (sub-bottom data)
  • Multi-ping mode for maintaining a high pulse rate for water depths more than 50 meters
  • Multi-frequency signals

 Optional Features

  • Sidescan extension (100kHz; cannot operate simultaneously with SBP)
  • DC power supply (either built-in or external)
  • Pre-configured laptop PC (control unit)
  • Transducer mounting bracket

 Software

  • SESWIN data acquisition software
  • SES Convert data converter software (SES/RAW to SEG-Y, XTF, ASCII)
  • SES NetView for display of online echoprints and system information on remote computers (via Ethernet) for QC
  • ISE post-processing software incl. GIS module (option)

  • Water depth range 0.5 – 400m
  • Sediment penetration up to 40m (depending on sediment type and noise)
  • Range / Layer resolution approx. 1cm / up to 5cm
  • Transmit beam width (-3dB) approx. ±2° / footprint Primary frequencies (PF) approx. 100kHz (frequency band 85 – 115 kHz)
  • Primary source level >238dB//µPa re 1m
  • Secondary low frequencies (SLF) centre freq. user selectable: 4, 5, 6, 8, 10, 12, 15 kHz
  • SLF total frequency band 2 – 22 kHz
  • Pulse type Ricker, CW
  • Pulse width user selectable 0.07 – 1.0ms
  • Ping rate up to 40 pings/s
  • Topside unit (transceiver) 0.30m × 0.40m × 0.30m (½19''/6U) / weight 19kg
  • Transducer (20m cable) 0.34m × 0.26m × 0.08m / weight 22kg incl. cable
  • Heave / Roll / Pitch compensation yes / no / no (depending on sensor data)
  • Data acquisition digital 24bit / 70kHz; envelope, SLF full waveform
  • Auxiliary Input GNSS, HRP sensor, trigger
  • Auxiliary Output trigger, bottom track, analogue SLF
  • Power Supply 100–240V AC or 12/24V DC (option) / <200W

Customer reviews

No reviews were found for Compact - Model SES-2000 - Sub Bottom Profiler. Be the first to review!