Walter Stauffenberg GmbH Co. KG

Model DIN 3015-2 - Heavy Stauff Block Clamps

From

0

Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 2), designed as a construction kit for the
installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial
outside diameters from 6 mm to 450 mm / .24 inch to 17.71 inch.Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Installation of Pipes, Tubes and Components

  • Clamp bodies with profiled inside surface and tension clearance
  • To be used as fixed point clamp preventing the line from sliding
  • Clearance between the clamp halves provides tension of the tube or pipe
  • Vibration/noise reducing and impact absorbing effect towards the direction  of the line provided by the grooves on the inside

Installation of Hoses and Cables

  • Clamp bodies with smooth inside surface without tension clearance
  • Smooth inside surface and chamfered edges avoid damaging of the hose or cable
  • To be used as guide allowing the line to slide
  • Choose the internal diameter of the clamp body slightly smaller than the outside diameter  of the hose or cable to use it as fixed point clamp preventing the line from sliding

Installation of Pipes, Tubes and Cables

  • Clamp bodies with individual elastomer inserts
  • Vibration/noise reducing installation of pipes and tubes
  • Most effective reduction of vibration and noise
  • Extra-gentle installation of hoses or cables

Installation of Hoses

  • Only one clamp body required for two different hose diameters
  • Rotate upper clamp half by 180° in order to reduce the diameter
  • Available for 3 different diamater combinations of standard hoses and compact hoses

Installation of Proximity Switches

  • Installation of proximity switches according to DIN EN 60947-5-2 or similar (rectangular construction)
  • Recommended to be used with Hexagon Rail Nut SM and Mounting Rail TS to provide axial and horizontal position adjustment

Installation of Cables

  • Recommended for the installation of electric cables with diameters between 20 mm and 50 mm / .79 inch and 1.97 inch
  • Recommended to be used with Hexagon Head Bolts AS and Cover Plate DP,
  • Socket Cap Screw IS or Slotted Head Screw LI
  • For varying cable diameters, only the bolt lengths need to be varied

Customer reviews

No reviews were found for Model DIN 3015-2 - Heavy Stauff Block Clamps. Be the first to review!