Environmental Industry Equipment
-
ShowcaseManufactured by RunDry Evaporatorsbased in USA
RunDry’s RD-E2, 2 gph RunDry Evaporators are a very efficient alternative for disposing of the wastewater from your industrial facility. This unit can be operate for about $0.25USD/gallon or $0.07USD/liter, this is a significant saving if you are paying for a waste hauler to take your wastewater ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Innovation nilu ASbased in NORWAY
Our new SeSam sequential air sampler is in the final testing stages and is expected to be released in ...
-
ShowcaseManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept ALTS was developed by Concept for the Royal Air Force to enable the fast and accurate leak testing of its wide-bodied aircraft. The ALTS produces a sub-micron, non-contaminating, artificial smoke (entrained in inert carrier gas) in the aircraft fuselage, utilising the aircraft’s own 115v 400-450 Hz supply. The unit will also operate on 50 Hz. The unit uses the same chemical ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while meeting global requirements for data integrity. Designed for intuitive and reliable aerosol particle counting, this newest addition to the PMS fleet ...
-
ShowcaseManufactured by Proco Products, Inc.based in USA
Proco Style 233 expansion joints are built to withstand even the most rigorous piping system configurations. They are triple wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 233 expansion joints are appropriate for a wide variety of industrial applications, and are available in open arch ...
-
ShowcaseManufactured by Questron Technologies Corporationbased in CANADA
Ideal for digestion, extraction, evaporation, and synthesis. Built-in temperature and pressure monitoring of each digestion vessel. Controlled release & resealing of over pressure. Simple Vessel handling station.Compatible with LVHT and eVHP type vessels. Remote wireless controller. Two-speed, 150 CFM exhaust for fume removal and vessel ...
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
ShowcaseManufactured by Skim-pakbased in USA
skim-pak series 600 is designed to remove floating contaminants including oils, foams and particulates from limited access and smaller skimming ...
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
ShowcaseManufactured by ENVICON GmbHbased in GERMANY
ENVICON EMS membrane disc diffusers with the outer diameters 330 mm (12”) and 270 mm (9”) are available in various membrane materials and with various membrane fastening systems. The membranes of the 12” diffusers can be easily replaced on site and without the need for special ...
-
ShowcaseManufactured by WESS GLOBAL, INC.based in SOUTH KOREA
ENV200-C clamp-on density measurement guarantees fit-and-forget and reliable measurement with every kind of measuring medium. Different from other density meters, its measurement isn't affected by pressure, corrosiveness, nor abrasiveness. As the clamp-on sensor can be mounted outside of pipe line even under flow-running condition, the user neither need to stop their process nor to consider the ...
-
ShowcaseManufactured by Water Storage Tanks, Inc.based in USA
Oversized roofs on tanks are a common practice to achieve a more aesthetically appealing roof line with water tanks. Often times this is done to match the profile of masonry or a stone wall covering the exterior of tank or to match the roof line of an existing building or structure. CorGal roofs are regularly used on structures that do not hold water in order to create a visual architectural ...
-
ShowcaseManufactured by Shanghai Metash Instruments Co.,Ltd.based in CHINA
2.5 inches LCD screen: Equipped with a 2.5 inches LCD screen to give a clear display of standard curves and groups of ...
-
ShowcaseManufactured by membraPure GmbHbased in GERMANY
Engineered for the production of ultra-pure water directly from tap water, the Aquinity² models specialize in generating ultra-pure water straight from the tap source. The Aquinity² P10 ultra-pure water system features a reverse osmosis (RO) module that directly delivers deionized water into an integrated 10L tank. Subsequently, Type I grade water is produced using a polisher cartridge. ...
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
ShowcaseManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® In-line flow meter you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
ShowcaseManufactured by Hermann Sewerin GmbHbased in GERMANY
Gas leak detector with or without pump - for indoor installations and house tests. The EX-TEC SNOOPER 4 is a gas leak detector for detecting the smallest leaks in installation lines and at connection points. The modular device concept allows users to choose either a basic device without a pump (diffusion device) or a device with integrated ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you