Ensival-Moret  - a MORET Industries Company

- Model Emtech - ISO Chemical Process Pump

From

0

Available with open impeller or closed type (Closed impeller provided with wear rings). Flanges PN16 - Option PN20 ANSI (150 lbs). Construction in accordance with ISO 5199 and dimensions in accordance with ISO 2858. BACK PULL-OUT design: dismantling without disturbing piping or motor. Suitable for severe continuous duties. Bearing type : three rolling-contact bearings lubricated by oil or by grease as required. Shaft fully protected from pumped liquid by shaft sleeve and O-ring.

  • Shaft fully protected from pumped liquid by shaft sleeve and O-ring.
  • Shaft seal by standard single, double, tandem or cartridge mounted mechanical seal.
  • Mechanical seal installation in open type stuffing box as standard.
  • Pressure in stuffing box controlled by impeller back vanes.
  • High efficiency.
  • Low NPSHr.
  • Maximum interchangeability of parts throughout the series.
  • Most standard models available ex stock.
  • Adapter frame manufactured from 316 stainless steel upon request.
  • Heating or cooling jacket upon request.
  • Option: INPRO SEAL VBX

  • Flow : up to 350 m³/h (1,540 US gpm)
  • Total head : up to 160 m (525 ft)
  • Maximum operating pressure : 20 bar (290 PSI)
  • Temperature operating range : up to 180° C (356° F)
  • Maximum speed : 3,600 rpm at 60 Hz
  • Higher flows and heads upon request

  • Duplex SS : A743 CD4Mcu
  • Super Austenitic SS : A 743 CN7M
  • Cast iron : A48 class 35B
  • 30% chr. Cast iron A532 Class 3
  • Other materials upon request, titanium, Hastelloy, nickel…

For all industries

  • Chemical industry
  • Petrochemical industry
  • Steel industry
  • Paper industry
  • Food industry

Customer reviews

No reviews were found for Ensival Moret - Model Emtech - ISO Chemical Process Pump. Be the first to review!