Ensival-Moret  - a MORET Industries Company

- Model ICN - ISO Chemical Process Pump

From

0

Centrifugal ISO Process Pump complying with ISO2858‐5199 standard. Closed or semi-open impellers provide high efficiency over a wide performance range while maintaining low NPSHr.- Flanges PN16 - Option PN20 ANSI (150 lbs). Metal-to-Metal casing seal providing the right O-Ring compression and a perfect alignment. Tapered seal chamber with ribs to reduce circumferential velocities, solids and gas pockets. Grooved wear ring to prevent seizing risks. Closed or semi-open impellers provide high efficiency over a wide performance range while maintaining low NPSHr. Wear plate is sealed by O-ring.

  • The design allows for easy installation and removal of the impeller while providing a strong reliable power transmission (double that of keyed impeller design). It is self-locking and tolerates reverse rotation. 
  • Shaft sealing by mechanical seal (cartridge seal or component) and various optional sealing constructions. 
  • Bearing frame has a large oil capacity to provide optimum bearing lubrication. 
  • Adjustable bearing carrier allows for easy impeller clearance adjustment to the wear plate. 
  • Standard shaft material is duplex stainless steel, which provides both high mechanical strength and superior corrosion resistance. 
  • Standard bearing protection by Inpro or equivalent oil seals. 
  • Back-to-Back angular contact bearings handle both high hydraulic axial loads and radial loads due to belt drives. 
  • High radial load roller bearing.

  • Shaft sealing by mechanical seal (cartridge seal or component) and various optional sealing constructions.
  • Bearing frame has a large oil capacity to provide optimum bearing lubrication.
  • Adjustable bearing carrier allows for easy impeller clearance adjustment to the wear plate.
  • Standard shaft material is duplex stainless steel, which provides both high mechanical strength and superior corrosion resistance.
  • Standard bearing protection by Inpro or equivalent oil seals.
  • Back-to-Back angular contact bearings handle both high hydraulic axial loads and radial loads due to belt drives.
  • High radial load roller bearing.

  • Flow : up to 6500 m³/h (28,622 US gpm)
  • Total head : up to 160 m (525 ft)
  • Maximum operating pressure : 16 bar (232 PSI)
  • Temperature operating range : up to 180° C (356° F)
  • Maximum speed : 3,600 rpm at 60 Hz
  • Higher flows and heads upon request

  • Standard: 26/5/2 + Cu stainless steel, FT25 cast iron
  • Other materials upon request: nodular cast iron, hastelloy, titanium, inconel,...

  • For all industries
  • Chemical
  • Petrochemical
  • Food processing
  • Desalination
  • Water treatment
  • Pulp and Paper...

Customer reviews

No reviews were found for Ensival Moret - Model ICN - ISO Chemical Process Pump. Be the first to review!