F&J - Model LV-14ME - Breathing Zone Low Volume Air Sampler (200 - 240 VAC)
Model LV-14ME is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm - 213 cm (4' to 7') above floor level.
The LV-14ME air sampler includes a 1/4 HP oil-less, carbon vane vacuum pump with a constant airflow regulator for use where a nearly constant airflow is desirable.
The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all times permitting it to run cooler; thus extending its lifetime. The oil-less pump requires no lubrication to maintain optimal efficiency during its service life. The pump is mounted on a mobile cart with two rubber wheels to permit mobile transportation of the unit.
The LV-14ME Air Sampling System is designed for continuous indoor operation. Please consult the product specification for the design temperature and the installation category. The typical operating flow range is 1 to 3 CFM (10 – 100 LPM).
- Constant air flow regulator
- Durable 1/4 HP oil-less carbon vane pump designed for continuous use
- Instrument control box conveniently located
- Internal intake and exhaust mufflers
- Adjustable sampling gooseneck 122 – 213 cm (4’ – 7’)
- Rotometer, elapsed time meter and vacuum gauge
- Mobile cart with 8” hard rubber wheels
- 220 – 240VAC, 50/60Hz; single phase
- PUMP TYPE: Oil-less, carbon vane 1/4 HP; 1425 RPM @ 50Hz
- MAXIMUM CAPACITY: 4 CFM (113 LPM) at 0” Hg Pressure drop
- ULTIMATE VACUUM: 25” (635 mm) Hg at sea level
- VACUUM GAUGE: 0” – 30” (0 – 762 mm) Hg
- POWER REQUIREMENTS: 220 – 240VAC; 50/60 Hz at 3 amperes; single phase
- ELECTRICAL CORD: All temperature, 3-wire, 14 gauge
- THERMAL OVERLOAD PROTECTION: Furnished as an integral part of the motor.
- CONSTANT AIRFLOW REGULATOR: Aluminum construction with silicone diaphragm; adjustable from 1 to 3 CFM (10-100 LPM)
- DIMENSIONS: 50,8L × 26W × 213 cm H (21” × 14”W × 84”H)
- WEIGHT: 30,4 kg (67 lbs.)
- WHEELS: 8”, hard rubber
- SAMPLING HEIGHT: 122 – 213cm (4’ to 7’)
- INSTALLATION CATEGORY: Pollution Degree 2
- AVAILABLE ROTOMETERS SCALES:
- MODEL RANGE
- R10100 10 – 100 LPM
- R13 1 - 3 CFM
- ELAPSED TIME INDICATOR: Resettable Type: 9999,9 minutes or hours.
- COMBINATION FILTER HOLDER: Durable plastic combination filter holders for F&J Model B, C or M charcoal cartridges and 47 mm, 2” or 50 mm diameter particulate filter paper are available. All models have quickdisconnect function.