Fritsch Milling and Sizing

- Model LABORETTE 24 - Vibratory Feeder with V-shaped

From

0
For slow, measured feeding to achieve a narrow, directed sample discharge of free-flowing materials.

Areas of Application
Method of Operation
  • Through vibration of a channel of stainless steel, free-flowing material is conveyed out of a funnel and to the open end of the channel in a uniform stream.
  • The rate of flow can be controlled individually with a separate control device by modifying the vibration amplitude of the channel.
  • Control of the vibration amplitude is performed by a microprocessor-controlled control unit with which even the smallest quantities of material can be conveyed with absolute uniformity.
NEW: Control unit for Vibratory Feeder LABORETTE 24
  • Setting of the maximum feed quantity in the setup mode by the user
  • Adjustment of the feed intensity and time via display
  • Fine adjustment of the material flow even of smallest quantities
  • Reproducible setting of the feed rate, when changing the material
  • Digital display of the set feed rate in percent
  • Digital and RS232 interface
  • The new control unit is retrofittable for all Vibratory Feeders LABORETTE 24

  • As a standard, with polished stainless steel channel and funnel, PTFE-coating on request
  • Precisely controlled by microprocessor control with interface
  • Extensive choice of flow rates for smallest and largest quantities
  • Suitable for both coarse and fine materials
  • Simple to clean due to easily removable components
  • Small footprint
  • V-shaped and U-shaped channels easy to interchange
  • Maintenance-free electromagnetic drive and components
  • Recyclable, compact cast housing
  • Separate control unit
  • Low energy consumption, only 0.1 kW drive power
  • Certified safety (CE mark)
  • 2-year warranty

The standard equipment delivered with the Vibratory Feeder includes the wide V-shaped channel, funnel and control unit, but does not include a support frame, which must be ordered as an accessory, if needed. The V-shaped channel can be easily replaced with the U-shaped channel for uniform, wide material feeding.

  • Voltage/connection values: 200-240 V/1~ *
  • Frequency: 50-60 Hz *
  • Power consumption: 20 W *
  • Complete length of the conveyance channel: 330 mm
  • Channel overlap: 215 mm
  • Max. feed quantity: 1500 g/min
  • Min. feed quantity: 1 g/min
  • Change of the channel: V-shaped channel and U channel can be easily exchanged
  • Weight: 12 kg
  • Dimensions: W x D x H Bench top instrument 44 x 14 x 34 cm

Customer reviews

No reviews were found for Fritsch - Model LABORETTE 24 - Vibratory Feeder with V-shaped. Be the first to review!