Fritsch Milling and Sizing

- Model PULVERISETTE 13 Premium Line - Disk Mill

From

0
The premium model of the FRITSCH Disk Mill for efficient fine grinding of hard-brittle to medium-hard solids: Even safer due to the automatic locking of the collecting vessel and grinding chamber, even easier to operate due to the convenient motor-driven grinding gap adjustment with digital gap display. A well-designed display shows all of the parameters.

Areas of application

Mining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research.

Method of operation
  • The material to be ground is comminuted by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. The ground material automatically falls down through a pre-set grinding gap into the collection drawer. The desired final fineness can be defined reproducibly by simply adjusting the digital setting of the gap width.
  • It’s this easy: Simply press the button to lock the grinding chamber, use the plus/minus buttons on the digital display to set the grinding gap and grinding time reproducibly and with accuracy to the second, fill in the sample into the funnel and start the grinding process.
  • For especially fast and continuous premium pre- and fine-grinding of large quantities of coarse material, the Disk Mill PULVERISETTE 13 premium line can be combined with the Jaw Crusher PULVERISETTE 1 premium line

 

 

  • feed size 20 mm

  • Max. throughput 150 kg/h with extra powerful motor

  • Rotating speed grinding disk 440 U/min

  • Fine grinding down to 0.05 mm

  • Motor-driven grinding gap adjustment in 0.05 mm steps

  • Especially safe due to automatic safety locks for locking grinding chamber and drawer

  • Easy cleaning and  optimal material feeding due to large removable plastic funnel

  • Clean Design: smooth grinding chamber inner surfaces and labyrinth sealing of grinding chamber ensure a fast cleaning an protection against contamination of the sample

  • Dust-free grinding due to connection of dust exhaust system and special sealing of drawer

  • Automatic safety locks for clamping the lock and grinding chamber drawer automatically

  • Precise motor-driven adjustment of distance between grinding disks of up to  50 µm accuracy

  • Motor-driven zero point adjustment for compensating wear on grinding disks and precise re-adjustment after replacement

  • Longer service life of grinding disks via the control display

  • Easy change of the grinding disks

  • Combinable with the Jaw Crusher PULVERISETTE 1 premium line

 

  • For every FRITSCH Disk Mill PULVERISETTE 13 premium line, you need at least one fixed and one movable grinding disk. These are available in 4 different materials. Normally, both grinding disks of the same material are selected which must always be harder than the sample to be ground.
  • Especially for metal-free grinding, the Disk Mill PULVERISETTE 13 premium line can be ordered with a complete polymer coating inside of the grinding chamber. The polymer coating has to be ordered separately order no. 13.3090.16.

  • Voltage/connection values: 400 V/3~*
  • Frequency: 50-60 Hz*
  • Input power: 1830 W*
  • Working principle: Shearing
  • Max. feed size: (depends on the material) 20 mm
  • Min. sample quantity: 20 - 30 ml
  • Max. throughput: (depends on material) 150 kg/h
  • Final fineness: 0.05 - 12 mm
  • Feeding: Batchwise/ continuous
  • Grinding parts: Fixed and movable grinding disk
  • Materials of the grinding parts: Hardened steel cast, manganese steel, hardmetal tungsten carbide, zirconium oxide
  • Rotating speed: Grinding disks 440 rpm
  • Bearings: Needle and double row angular contact ball bearings
  • Dimensions: (W x D x H) Bench top instrument 52 x 105 x 63 cm
  • Weight: 240 kg

Customer reviews

No reviews were found for Fritsch - Model PULVERISETTE 13 Premium Line - Disk Mill. Be the first to review!