Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or the down-the-hole hammer. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with sampler tubes and handle with beating head, thin walled sample tubes, impact-absorbing hammer, down-the-hole hammer and maintenance equipment.
The set is packed in an aluminium transport case. In case of an undisturbed sample it is often difficult to remove the sample from the sampler tube. By using sample liners it is easy to remove the sample from the tube. The thin-walled tube with the sample is sealed for transport to the laboratory.
Benefits Liner sampler set
- Liner allows easy removal of sample
- View the sample directly in the field
- View the sample without touching
- Set B more applicable for harder soils
- Stainless steel sampler body
- Liner will sorb volatiles
Samples are suitable for:
- Soil fertility determinations.
- assess of soil structure.
- Volume weight determinations.
- Determination of granular composition.
- Soil technical measurements.
- Field education.
Maximum root thickness 10 mm
Maximum sample depth 7 m
Product material stainless steel, iron, other material
Sample diameter 50 mm
Sample length 300 mm
Sample specification undisturbed
Sample stored in tube
Sample volume 590 ml
Package size 130 x 50 x 72 cm
Weight 38 kg
Soil sampling above groundwater table
Soil sampling below groundwater table
Environmental soil research
Soil texture research
Root zone sampling