Hoover Ferguson - Cargo Valve Tote Tanks
The UN31A Cargo Valve Liquitote® IBC was designed to comply with the DOT’s Special Provision 12412. DOT - SP12412 IS commonly referred to as the pump-off special permit, which allows for the discharge of combustible and flammable liquids from an IBC while it is located on a transport vehicle. Under this special permit, only IBCs with bottom discharge systems that include emergency shut-off valves are permitted to discharge hazardous material from a trailer or flat bed. The Cargo Liquitote IBC is a one-piece 10-gauge (.135”/3.4 mm) stainless steel liquitote body with single-seam welding which provides greater strength due to a 50% less weld area, and an 8-gauge (.165”/4.2 mm) bottom.
The Cargo Valve Tote can hold, transport, and discharge hazardous and flammable materials while on the back of a trailer or flat bed. To comply with the special permit’s requirements that each emergency shut-off valve system must have three means of closure, the Hoover Ferguson Cargo Valve Liquitote’s all 316 stainless steel cargo valve assembly includes the closure system noted in specifications.
- 10 gauge (.135'/3.4 mm), 304 Stainless Steel with 2B finish
- 8 gauge (.165'/4.2 mm) sloped bottom
- Stackable with sloped design center drain
- Heavy-duty lifting lugs and leg positioners
- 22' (55.8 cm) top opening/manway with fill port, EPDM gasket, Zinc-plated bolted clamp ring, formed neck
- 3'(7.62 cm) Stainless steel pressure vacuum relief fill cap
- 2' (5.08 cm) Top fill bung with EPDM gasket
- Fork Lift Channels: 2-way fork channels with two fork bars welded to fork channels for 4-way lifting ability
- Cargo Valve Assembly: Meets the three methods of closure requirement of DOT's SP 12412
- UN Markings