HORIBA Europe GmbH

- Model IG-320 - Gloss Checker



Gloss is a surface's attribute of directly reflecting light and the degree of this reflected light is termed glossiness. The IG-320 measurement angle is set at the 60° standard angle allowing discerning even the lowest levels of gloss and provides a definite numerical value for glossiness. The IG-320 provides accurately and instantaneously measurement from low gloss matte surfaces to the highly polished texture for such operations management areas as floor maintenance, polishing, and coating. Up to 99 measurements can be taken with a simple key operation and averaged using another key. Up to 99 averages can be stored for later use. Easy data management promises smooth inspection work. Because the IG-320 does not require the use of special measuring technology, it can easily be used by anyone.

  • High precision Measurement range
  • Internal memory
  • Average mode
  • Measuring angle 60°

  • Optical System
    • Incident angle 600
    • Reception angle 600
  • Measurement area: 12x6mm oval
  • Light Source: LED (wavelength:880 nm)
  • Detector: SPD (Silicone Photodiode)
  • Measuring range: 0-100.0
  • Display range: 0mm-199.9mm (resolution:0.1)
  • Reproducibility: ±5%F.S. ±within 1 digit
  • Power Source: S-006P dry batter (9VDC) for operation.
    CR-2025 lithium battery (3VDC) for memory
  • Continual-use time: 15 hours or more
  • Ambient Conditions: 0-400 C
  • Dimensions: 78(w)  189(H) 58(D)mm
    3.1(w)  7.4(H)  2.3(D)in
  • Mass: Approx. 400g(with battery)
  • Additional Functions:
    • Automatic Calibration
    • Automatic power cut-off
    • Display hold
    • Overrange display
    • Battery alarm
    • Built-in data memory (max.99)
    • Computation of averages
    • Keystroke confirming tone

  • Floor maintenance
  • Surface cleaning quality control
  • Stone and tile gloss measurement
  • Checking printed matter
  • Quality control of paint and ink
  • Polished metal surface measurement (chrome plating)
  • Inspection of paint protection and waxing
  • Auto-body paint inspection
  • Surface inspection of plastic mouldings
  • Evaluation of detergents and washers
  • Checking masonry and building exteriors

  • Used to show/evaluate the effectiveness and performance polishing and grinding operation.
  • Can be used for quality control
  • Increase user’s product value (by improving the quality of the service they provide)
  • Save time
  • To prove that quality standards have been met
  • To show high quality service has been achieved

Customer reviews

No reviews were found for HORIBA - Model IG-320 - Gloss Checker. Be the first to review!