HSM GmbH + Co. KG

- Model V-Press 860 max - Vertical Baling Presses / Vertical Balers

From

0

With a pressing power of 548 kN and employing low-noise and energy-saving technology, the HSM V-Press 860 is the most economical and ecological solution for your waste disposal.

Sliding doorTo fill the press, the upper half of the doors is pushed down

  • To fill the press, the upper half of the doors is pushed down
  • Automatically opens after the compression process
  • Opened upper edge of the gate can be used as storage and therefore facilitates the filling
  • Automatic start of the pressing process after closing the door
  • Easily operated

Hydraulic door lock

  • Convenient opening and closing via two-hand operation
  • Particularly suitable for rapidly expanding material
  • No manual effort required

Energy efficient and quiet

  • With the rapid motion technology developed specifically for the V-Press series the power consumption and drive power are significantly reduced and at the same time the through put rate increases. The cycle time is reduced with this technology by up to 40% compared to conventional drives. Due to special pump technology the machines are particularly quiet.

Optimized pressing

  • Massive press ram and extremely robust press plate guidance.

Convenient and secure automatic start

  • Pressing procedure starts automatically upon closing the door.
  • Upon opening the door a security switch assures an automatic stop of the pressing procedure.

Low installation height and small footprint

Easy-to-use

  • The entire pressing cycle, beginning with closing the door, is fully automatic. A text display informs you in detail about the respective status of the process. When the pressing procedure comes to an end, the sliding door opens automatically. Extracting the bale is simple and easy, and it can be comfortably transported on a pallet.

Extremely high level of process reliability

  • Thanks to the newly developed HSM TCS (TorsionControlSystem), the angle of the press ram is minitored continuously in every direction avoiding one sided overcharge. Optimising the pressing procedure and assures longer service life.

  • Article Number: 000000000006148374
  • EAN: 4026631056557
  • Pressing power: 548 kN
  • Loading aperture width: 1195 mm
  • Loading aperture height: 650 mm
  • Bale length: 1200 mm
  • Bale width: 780 mm
  • Bale height (up to): 1200 mm
  • Bale weight, depending on material (up to): 480 kg
  • Cycle time when idling vacío: 25 s
  • Driving power: 4 kW
  • Voltage: 400 V
  • Frequency: 50 Hz
  • Width x Height x Depth: 1797 x 2985 x 1247 mm
  • Weight: 2083 kg
  • Number of strappings: 4
  • Strapping material: Wire
  • Industry type: Industry and Manufacturing, Recycling & Disposal, Retail, Logistics and Distribution, Print and Packaging
  • Press material: Plastic film, Punch waste/residue, Clothing, Polystyrene, Big Bags, Mixed paper, Cardboard

Customer reviews

No reviews were found for HSM - Model V-Press 860 max - Vertical Baling Presses / Vertical Balers. Be the first to review!