HSM GmbH + Co. KG

- Model V-Press 860 S - Vertical Baling Presses / Vertical Balers

From

0

The model HSM V-Press 860 S is the perfect machine for the volume reduction of stiff plastics (e.g. monitor and TV set housings) and expanding plastic film (other materials upon request).

Double door

  • To fill the press, the upper half of the doors is swung to the right
  • Self-latching closing technology

Hydraulic door lock

  • Convenient opening and closing via two-hand operation
  • Particularly suitable for rapidly expanding material
  • No manual effort required

Energy efficient and quiet

With the rapid motion technology developed specifically for the V-Press series the power consumption and drive power are significantly reduced and at the same time the through put rate increases. The cycle time is reduced with this technology by up to 40% compared to conventional drives. Due to special pump technology the machines are particularly quiet.

Optimized pressing

  • Massive press ram and extremely robust press plate guidance.

Convenient and secure automatic start

  • Pressing procedure starts automatically upon closing the door.
  • Upon opening the door a security switch assures an automatic stop of the pressing procedure.

Low installation height and small footprint

Easy-to-use

  • The entire pressing cycle, beginning with closing the door, is fully automatic. A text display informs you in detail about the respective status of the process. When the pressing procedure comes to an end, the sliding door opens automatically. Extracting the bale is simple and easy, and it can be comfortably transported on a pallet.

Extremely high level of process reliability

  • Thanks to the newly developed HSM TCS (TorsionControlSystem), the angle of the press ram is minitored continuously in every direction avoiding one sided overcharge. Optimising the pressing procedure and assures longer service life.

  • Article Number: 000000000006148854
  • EAN: 4026631056618
  • Pressing power: 434 kN
  • Loading aperture width: 1195 mm
  • Loading aperture height: 650 mm
  • Bale length: 1200 mm
  • Bale width: 780 mm
  • Bale height (up to): 1200 mm
  • Bale weight, depending on material (up to): ca. 480 kg
  • Cycle time when idling vacío: 25 s
  • Driving power: 4 kW
  • Voltage: 400 V
  • Frequency: 50 Hz
  • Width x Height x Depth: 1797 x 2985 x 1076 mm
  • Weight: 2285 kg
  • Number of strappings: 4
  • Strapping material: Wire
  • Industry type: Industry and Manufacturing, Recycling & Disposal, Logistics and Distribution, Retail, Food & beverage industry, Print and Packaging
  • Press material: HDPE / LDPE hollow containers & plastic bottles, Plastic film, Punch waste/residue, Clothing, Polystyrene, Big Bags, Mixed paper, Cardboard, PET, soft packaging
  • Volume throughput clothing (theor.): 1500 kg/h
  • Volume throughput foil (theor.): 240 kg/h
  • Volume throughput cardboard (theor.): 240 kg/h
  • Volume throughput mixed paper (theor.): 360 kg/h
  • Volume throughput polystyrene (theor.): 120 kg/h
  • Volume throughput PET (theor.): 240 kg/h
  • Volume throughput HDPE/LDPE (theor.): 420 kg/h
  • Volume throughput punche waste (theor.): 360 kg/h

Customer reviews

No reviews were found for HSM - Model V-Press 860 S - Vertical Baling Presses / Vertical Balers. Be the first to review!