Castolin Eutectic

- Model 55396C - HVOF Powder Self-Fluxing Alloy – Nickel

From

0

55396C is mainly spherical powder manufactured by atomising a formulation of self-fluxing nickel based alloy. It has been developed for spraying with the CastoJet CJK5 system which is a High Pressure HVOF using kerosene as liquid fuel. 55396C powder is also suitable for other HVOF systems. 55396C sprayed coatings are dense and smooth with high bond strengths on a wide variety of metallic substrates. They resist exceptionally well to corrosion, low stress abrasion, fretting and particle erosion. It can be used for service temperatures up to 800°C.

  • Pump sleeves
  • Pump screws
  • Wear rings
  • Pump seals
  • Pusher rods
  • Exhaust fans
  • Capstan coiling drum
  • Ball valve
  • Run out table rollers
  • Chrome plating replacement
  • Buffering layer for HVOF carbides coatings

Micro hardness: ~ 750 HV1
Service temperature: max 800°C (1470°F)
Bond strength (EN 582: 1994): >70 MPa (>10,000 psi)
Deposition efficiency (EN ISO 17836: 2004): ~ 56%
Porosity (image analysis): <0.5%

The above values depend on the spraying system and parameters used. Therefore measured coating properties may vary from above values.

Customer reviews

No reviews were found for CastoJet - Model 55396C - HVOF Powder Self-Fluxing Alloy – Nickel. Be the first to review!