Port Industries, Inc.

- Model 2700 - Wheel Trencher

From

0

Total Overall Weight: 48,500 LB, Height: 12’, Width: TIRES 10’ 6” OVERALL 11’ 2”, Length: 42’ 6”, Travel Speeds: TRAVEL SPEEDS, 1st Low / High: 0 - 2 MPH / 0 - 4 MPH, 2nd Low / High: 0 - 7.5 MPH / 0 - 15 MPH

Tractor Unit

  • Ground Clearance: TRANMISSION - 27¡¨ UPRIGHTS - 17¡¨
  • Wheel Base: 12¡¦ 6¡¨
  • Front Axle: OUTBOARD PLANETARY LIMITED SLIP
  • Rear Axle: INBOARD PLANETARY w/ HYD. DIFF LOCK
  • Tires - Standard: 30.5 x 32L - 14 PLY SPADE GRIP (R2) TREAD
  • Track Width - Center Line Of Tires: 92'
  • Transmission: FOUR SPEED WITH TWO SPEED SHIFT ON THE GO
  • Auto/Manual Leveling: 8„a RIGHT AND 8„a LEFT
  • Auto Load Control (Standard): ADJUSTABLE SET POINT
  • Cab (Standard): HEAT AND AIR CONDITIONING
  • Hydraulic Differential Lock: REAR AXLE - HYD. APPLIED
  • Brakes: INDEPENDENT INBOARD REAR AXLE - HYD. APPLIED

Engine

  • Make & Model: DEERE 13.5 / IN LINE 6 CYL. / TIER III COMPLIANT
  • Gross Horsepower: 425 HP @ 2100 RPM’ s w/ POWER BULGE (475 HP)
  • Displacement: 13.5 LITER / 824 CU. IN.
  • Fuel Tank Capacity: 225 GALLON
  • Electrical System: 24 VOLT
  • Batteries - (2) 8d-Mhd: 2800 CCA RC 900
  • Cold Starting Aid: BLOCK HEATER OR ETHER KIT

Digging Wheel

  • Digging Wheel Diameter: 97' INSIDE / 126' OUTSIDE
  • Digging Wheel Construction: 3/4' x 6' RIMS WITH 1/2' x 3' ATTACHING RING
  • Digging Depth Range: 0 - 7’ 3”
  • Digging Width Range: 18 - 35'
  • Standard Cutting Arrangement: 16” BUCKETS w/CENTER CUTTERS (22” CUT)
  • Sloper Kit: OPTIONAL
  • Hydraulic Upright & Digging Wheel Pivot: 14.5°
  • Roller Slides: ROLLER (12) - 3”
  • Ground Clearance For Transport: UPRIGHTS - 17” BUCKETS - 36'
  • Pipe Box: 3 - 12” TILE LAYER, HYDRAULIC BEDDERS

Conveyor

  • LENGTH - 8’ (STANDARD) 10’ (OPTIONAL)
  • WIDTH - 36'
  • LEFT OR RIGHT DISCHARGE W/ 36' SHIFT

Hydraulic System

  • 120 GAL CAPACITY
  • CITGO TH FLUID OR EQUIVALENT
  • PRESSURE FILTRATION

Customer reviews

No reviews were found for Hydramaxx - Model 2700 - Wheel Trencher. Be the first to review!