Port Industries, Inc.

- Model 2710 - Wheel Trencher

From

0

The new Hydramaxx 2710 bucket wheel trencher from Port Industries provides a safer, more comfortable and productive environment for the operator.   The ROPS certified (awaiting final approval) cab assures the highest degree of operator safety.  The cab lowers for easy access – just one step off the ground – and rises 48” for maximum visibility. The sealed design of the cab with factory heat and A/C provide a clean and quiet environment.  Ergonomic processor based controls positioned on the arm rests, allow access to more systems information, and customized control options to increase performance and productivity.

General

  • Total Overall Weight: 49,000 LB
  • Height: 11’
  • Width: 11’ 3”
  • Length: 42’
  • Travel Speeds: TRAVEL SPEEDS
  • 1st Low / High: 0 - 2 MPH / 0 - 4 MPH
  • 2nd Low / High: 0 - 7.5 MPH / 0 - 15 MPH

Tractor Unit

  • Ground Clearance: TRANSMISSION - 27” UPRIGHTS - 23”
  • Wheel Base: 12’ 6”
  • Front Axle: OUTBOARD PLANETARY WITH LIMITED SLIP
  • Rear Axle: INBOARD PLANETARY WITH HYD. DIFF LOCK
  • Tires - Standard: 30.5 x 32L - 14 PLY SPADE GRIP (R2) TREAD
  • Track Width - Center Line Of Tires: 92”
  • Transmission: FOUR SPEED WITH TWO SPEED SHIFT ON THE GO
  • Auto / Manual Leveling: 8° RIGHT AND 8° LEFT
  • Brakes: INDEPENDENT INBOARD REAR AXEL - HYD. APPLIED
  • Elevating Cab (Standard): HEAT AND AIR CONDITIONING (standard)
  • Intelligent Processor Based Controls: AUTO LOAD CONTROL (standard)
  • System Monitoring: ON BOARD AIR (standard)

Engine

  • Make & Model: DEERE 13.5 / IN LINE 6 CYL. / TIER III COMPLIANT
  • Gross Horsepower: 425 HP @ 2100 RPM WITH POWER BULGE (450 HP)
  • Displacement: 13.5 LITER / 824 CU IN
  • Fuel Tank Capacity: 225 GALLON
  • Electrical System: 24 VOLT
  • Batteries - (2) 8d-Mhd: 1400 CCA RC 450
  • Automatic Ether Cold Starting Aid (Standard): OPTIONAL BLOCK HEATER KIT(S)

Digging Wheel

  • Digging Wheel Diameter: 97” INSIDE / 126” OUTSIDE
  • Digging Wheel Construction: 3/4” x 6” RIMS WITH 1/2” x 3” ATTACHING RING
  • Digging Depth Range: 0 - 7’ 3”
  • Digging Width Range: 18 - 40” (OPTIONAL 48”)
  • Standard Cutting Arrangement: 16” BUCKETS WITH CENTER CUTTERS (22” CUT)
  • Sloper Kit: OPTIONAL
  • Hydraulic Upright & Digging Wheel Pivot: 14.5°
  • Roller Slides: ROLLER (12) - 3”
  • Ground Clearance For Transport: UPRIGHTS - 17” BUCKETS - 36”
  • Pipe Box: 3 - 12” TILE LAYER, HYDRAULIC BEDDERS

Conveyor

  • LENGTH - 8’ (STANDARD) 10’ (OPTIONAL)
  • WIDTH - 36”
  • LEFT OR RIGHT DISCHARGE W/ 36” SHIFT

Hydraulic System

  • 120 GALLON CAPACITY
  • TRACTOR HYDRAULIC FLUID
  • FILTRATION 25 MICRON RETURNS / 5 MICRON PRESSURE

Customer reviews

No reviews were found for Hydramaxx - Model 2710 - Wheel Trencher. Be the first to review!