Chromatotec Group

- Hydrogen Generator

From

0

Hydroxychrom is a gas generator providing high purity (grade: 99.9995%) of hydrogen used as carrier gas or fuel gas for autoGC FID (for VOCs) and FPD (for sulfur compounds). Generator of high purity hydrogen used a carrier gas for airmoVOC and chromaFID analysers as well as for the FID flame. Hydroxychrom is a high purily hydrogen generator and an important tool for the incoming H2 of FID, FPD detectors, BTEX, VOC analyzers and others. Thanks to hydroxychrom. there is no need for a heavy and costly gas cylinder. The instrument's internal program and processor ensures the control of the generators and operational parameters such as water level, outlet Hi pressure and electrolyses current to be monitored online.

Thanks to the display and keyboard of the analyzer, operations on the instrument are simple and intuitive. Operational parameters are controlled by Hydroxychrom Viewer software (USB connection between hydroxychrom and the computer = XXX022 installed in an analyzer). Parameters and alarms can be monitored by MODBUS, a remote control or by a dry relay.

It uses the latest membrane technology (PEM) available for the production of electrolytic hydrogen. This technology is preferred to other techniques because it requires less maintenance and there is no need for dangerous caustic solutions. The reduction of dead volumes (less than 100 ml) as well as an “on demand generation” allow not to store hydrogen and to use this instrument in areas where hydrogen cylinders are forbidden. H2 is dried on-line, no need of cartridge to dry gas.

  • Hydrogen is produced by electrolysis of water through a polymer membrane. The electrolysis cell is fed with the distilled water located in the intermediate internal tank, which is supplied by the main external tank.
  • The hydrogen produced is dried continuously (need for dry air by external source: XXX916 or by internal source: XXX918) and pressure is regulated at 2 bar in standard.

In case of incorrect internal operation, overpressure, or the opening of the H2 circuit, the production of H. is stopped and an alarm is generated (automatic leak check). An automatic re start is done after a power cut.

  • Reduces operation costs. Return on investment within 2 years.
  • Improves resolution and detection limit versus Helium usage only. Provides High pressure stability.
  • H2 available 24/7 at constant purity. No contamination. v Independent source of Hydrogen that does not require any piping and can be easily moved around the laboratory.
  • Remote control from PC, l-phonc and l-pad
  • Very safe operation, internal leak-test, automatic shut-down, overpressure valve, current and voltage limits.
  • No handling and shortage of cumbersome gas cylinders. No cylinder rental fee.

  • Flow rate:
    • 100 mL/min in standard
    • 160 mL/min in option
    • 30 mL/min for FID and 70 mL/min for FPD
  • Water consumption :
    • With 30 mL/min H2consumption and with 3L of
    • distilled water, the production of hydrogen will be of 83 days.
    • External tank filled with 3L of distilled water or 5L distilled water bag in option
  • Outlet pressure : Adjustable with 2 bar in standard
  • Purity :
    • >99.9999% with continuous drying
    • Moisture : < - 60°DP
    • Hydrocarbons < 0.1 ppb
  • Life time of the de-ionizer bag : 12 months
  • Screen / Keyboard :
    • Controlled by Hydroxychrom Viewer software.
    • Installed in an analyzer supervisor of Chroma or Airmo
  • Connection : USB
  • Dimensions and weights :
    • Rack 19’’ – 4U
    • Height : 180 mm
    • Width : 482 mm
    • Depth : 600 mm
    • Net weights : 17 kg et 22 kg with air option

Customer reviews

No reviews were found for Hydroxychrom - Hydrogen Generator. Be the first to review!