ILUDEST - Model [DC/U]² - Distillation Control Unit
With the following functions: controlling of heating capacity (puls-package principle, 0-100 %), adjustment of: reflux-/withdrawal ratio from 0:999…999:0 (s) total reflux, total withdrawal, display of sump and head temperature, possibility to preselect safety limit values, reaching of the same will lead to a total shut down of the distillation process.
[DC/U]2 Distillation Control Unit
With controller for:
a heating capacity (puls-package principle, 0-100 %)
adjustment of: reflux-/withdrawal ratio from 1:999…999:1 (s)
total reflux, total withdrawal
display of bottom and head temperature
possibility to preselect safety limit values, reaching of the same will lead to a total shut down of the distillation process
[SU]2 Safety Unit
For the connection of an existing heating mantle, a heating bath or any other heating element (max. capacity 3.0 kW), whereby the power supply of the used element – an acoustic as well as an optical alarm will be released simultaneously and a relais output is activated – will be interrupted in case of:
deficiency of cooling water flow
2 temperature limits (response temperature value can be adjusted full scale), detected by Pt-100 thermometers located along the apparatus as per your requirements, will be exceeded the minimum level for the reboiler contents is fallen below (response level value can be adjusted full scale)
[TA]2 Temperature Display
Digital indicating instrument for the connection of up to 8 Pt-100 PRTs (Platinum Resistance Thermometers, Pt-100 sensors: please refer to our price list 'Pt-100').
[VC]2 Vacuum Controller
Digital on-off controller with set-point adjustment and actual value display. Measuring- and control range might be adapted, following the process requirements and the used type of pressure probe.
[LC]2 Level Controller
For the connection of an ILUDEST level sensor.
With one of the following switch outputs (standard option):
230 V, 16 A
24 V, 1 A
[RT]2 Reflux Timer
reflux-/withdrawal time adjustable: 1:999...999:1,
total reflux, total withdrawal
temperature range: 8.0...350.0 °C
accuracy: +/- 0.1°C (to reach the best accuracy, the controller might be calibrated with the corresponding Pt-100 sensor)
[LS]2 Power Controller
The available capacity of a heating element might be controlled:
in 1% steps from 0...100%
additional analogue input for control voltage
[DP]2 Differential Pressure Controller
To 'adjust' an constant column load and a corresponding separation efficiency:
with possibility to adjust the controller parameters (PID-controllers); thus, offering an optimum in adapting the controller to the requirements of the existing plant respectively process
measuring range: 1...50 mbar
control range: 1...50 mbar
ILUDEST program for data representation in WINDOWS™, for the data transfer from one of the controllers described above via the interface RS 232 to an existing PC, where the measuring values can be displayed graphically, stored, recalled at any time and printed.
Handle for single-case controller box