LumaSense Technologies, Inc., An Advanced Energy Company

- Model IN 5 and IN 5 plus Series - Infrared Thermometers for Non-Contact Temperature Measurement, -32 to 900°C

From

0

Advanced Energy's Impac IN 5 and IN 5 plus pyrometers have a solid and robust design for temperature measurement of non-metallic surfaces and painted, coated, or anodized metals. Temperature Ranges: Between -32 and 900°C. Analog Output:.     IN 5: 4 to 20 mA (linear), several temperature ranges available.     IN 5 plus: 0 or 4 to 20 mA (linear), adjustable. Small spot sizes (IN 5 = min. 2 mm and IN 5 Plus = min. 1 mm).

The Impac IN 5 and IN 5 plus pyrometers are specifically designed for non-contact temperature measurements on non-metallic surfaces and painted, coated, or anodized metals.

The version IN 5-L plus is equipped with optics with better fields of view for the measurements of small objects.

The high-speed version IN 5-H plus has a shorter exposure time of only 10 ms and is suited for fast-measuring tasks.

  • Operate in rough industrial environments
  • Digitally store and process temperature data
  • Adjust emissivity and exposure time directly in the instrument
  • Optimally match instruments to the right applications
  • Remotely adjust instrument parameters and configure a temperature subrange (IN 5 plus only)

  • High accuracy due to digital linearization of the ouput
  • Compact housing
  • Various optics available
  • Digital interfaces RS232 or RS485 and laser targeting light sighting system (IN 5 plus only)
  • Simple connection and operating with two wires (IN 5 only)

Temperature Ranges

IN 5

  • 0 to 100°C (MB 1)
  • 0 to 200°C (MB 2)
  • 0 to 300°C (MB 3)
  • 0 to 400°C (MB 4)
  • 0 to 500°C (MB 5)
  • 0 to 900°C (MB 9)
  • -32 to 50°C (MB 0.5)
  • -32 to 900°C (MB 9L)

Additional MB on request

IN 5 plus and IN 5-H plus
-32 to 900°C (MB 9)

IN 5-L plus
0 to 900°C (MB 9)

Measurement

Spectral Range
8 to 14 μm

Measurement Uncertainty
See data sheet

Repeatability

  • 0.3% of reading in °C or 0.6°C (at ε = 1, t90= 1 s)
  • Whichever value is greater. The instrument must be at a constant ambient temperature for a minimum of 15 minutes (IN 5, IN 5 plus or IN 5-H plus) or 30 minutes (IN 5-L plus).

Exposure Time t90

  • IN 5: 0.08 s; adjustable up to 5 s
  • IN 5 plus: 0.08 s; adjustable up to 30 s
  • IN 5-H plus: 0.01 s; adjustable up to 30 s
  • IN 5-L plus: 0.18 s; adjustable up to 30 s

Emissivity ε
0.2 to 1 adjustable

Optical

Sighting
All IN 5 plus models: Laser target light (maximum power level < 1 mW, λ = 630 to 680 nm, CDRH class II)

Optics
Three fixed optics

Distance Ratio (FOV)

  • IN 5, IN 5 plus, and IN 5-H plus: 50:1 (2 mm)
  • IN 5-L plus: 100:1 (1 mm)

Interface and Communication

Parameters
See data sheet

Analog Output

  • IN 5: 4 to 20 mA (linear)
  • All IN 5 plus models: 0 to 20 mA or 4 to 20 mA (linear), adjustable

Interface
IN 5 plus models: RS232 or RS485 (addressable, half duplex), Baud rate 1.2 up to 19.2 kBd

Environmental

Protection Class
IP65 (DIN 40050)

Ambient Temperature

  • IN 5: 0 to 70°C
  • All IN 5 plus models: 0 to 63°C

Storage Temperature
 -20 to 70°C

Relative Humidity
Non-condensing conditions

Weight
Approx. 0.410 kg

Housing
Stainless steel

CE Label
According to EU directives about electromagnetic immunity

Electrical

Power Supply
24 VDC (18 to 30 V); nominal, ripple must be less than 0.5 V

Power Consumption

  • IN 5: Maximum 20 mA
  • All IN 5 plus models: Maximum 70 mA

Load

  • IN 5: Maximum 700 Ω at 24 V (maximum 100 Ω at 12 V)
  • All IN 5 plus models: Maximum 500 Ω at 24 V (maximum 200 Ω at 18 V)

Isolation
Power supply, analog outputs and digital interfaces are electrically isolated from each other

Typical Applications

  • Plastics
  • Fluids
  • Rubber
  • Painted Parts
  • Paper
  • Asphalt
  • Ceramics
  • Wood
  • Textiles
  • Glass
  • Food
  • Coated Metals

Customer reviews

No reviews were found for Impac - Model IN 5 and IN 5 plus Series - Infrared Thermometers for Non-Contact Temperature Measurement, -32 to 900°C. Be the first to review!