Injecta S.r.l.

Injecta S.r.l.

- Model NX.2000 P - Measuring and Control Instruments

From

0

Voltage input (15÷30 VDC) for suspending the measurement via remote control system (hold). Selectable measurement scales using the programming menù, it is possible to select the available measurement scale to ensure operating versatility with a single instrument. Instrument recognises the buffer solution (pH and Redox) and completes the calibration suspending the dosage (HOLD) and showing the electrode’s efficiency in %. Multilingual menú, password protection for setting menú, quality indication of measurin probes. Digital display with high efficency blue leds with 2 lines of 16 digits per line, allows the conteporaneous visualization of 2 parameters: chemical measure and temperature. Panel Version 96x96x92 mm.

  • NX2000 Series Range: pH - 0÷14,00 (accuracy 1%)
  • Rx - ±1000 mV (accuracy 1%)
  • CD - 10÷20,000 μS (accuracy 1%)
  • low conductivity 0÷200 μS
  • high conductivity 0÷50.000 μS
    • probe K10 - 10÷2,000 μS (accuracy 1%)
    • probe K5 - 20÷4,000 μS (accuracy 1%)
    • probe K1 - 100÷20.000 μS (accuracy 1%)
  • CL Potentiostatic - 0÷2 / 0÷5 / 0÷10 / 0÷20 / 0÷200 ppm
  • FLOW - 0÷9.999.999 (segnale entrata input signal 0,5÷1.500 Hz)
  • Batch function calculation of an established volume
  • CL Amperometric - 0÷5 ppm
  • Temperature: 0÷100 °C with PT100 (accuracy 1%)
  • Current Output: 0/4÷20 20÷4/0 mA (±2%) galvanic separation
  • Power Supply: 100÷240 VAC 50/60 Hz
  • Set Point: 2 independent throught 10A 250V dry contact relay (resistance load)

Customer reviews

No reviews were found for Injecta - Model NX.2000 P - Measuring and Control Instruments. Be the first to review!