Integrated Tank Unit (ITU)
From BASF
Bulk preparation of polymer for numerous industries and applications. Coupled with ISU to give comprehensive outdoor polymer preparation system.
Benefits
Benefits
- Mixing tank is situated above the storage tank to give minimum footprint size
- Gravity transfer from mixing to storage tank eliminates requirement for pump
- Minimum installation work, fully wired and tested prior to delivery
Scope of Supply
The ITU comprises a mixing tank mounted above a storage tank, each of the tanks has an inspection hatch and both are provided with overflow and drain pipework complete with valves. An agitator is fitted to the mixing tank plus a transfer valve and pipe between the two tanks. Suitable access steelwork can be supplied to customer.
Features
- Suitable for use with standard or high capacity AeroWet™ or Fab unit
- Mixing / storage tank capacities of 2.5/2.5 m3, 6.5/6.5 m3, 12/12 m3, 25/25 m3
- Transfer valve for electrical or pneumatic operation
- Safety rail and access ladder
Additional equipment required
- Dry polymer storage hopper
- AeroWet™/100 or FAB 2/100 polymer preparation unit
Ancillaries
- Trace heating and lagging of external pipe-work
- Full range of automatic or manual control dosing equipment
- Installation, commissioning, planned maintenance and contracts
- Non standard systems by agreement
Capacity
- Standard sizes 2.5/25 m3 ; 6.5/6.5 m3 ; 12/12 m3 ; 25/25 m3 Services required
- 3 phase / 50 Hz power supply – most standard voltages can be catered for
- Potable water, dependant upon size of make up system installed
Operation
Polymer is fed from the storage hopper via a screw feeder at a constant rate into an air stream from the blower. Air conveys the powder via the JetWetTM DISPERSER into the agitated mixing tank. After a predetermined time agitation stops and the polymer solution is transferred by the dump valve under control of the storage tank level controllers. The cycle is then repeated.
Noise
Variable – refer to applicable polymer unit Data Sheet to be installed.
Dimensions
6.5/6.5 m3
Length : 3400 mm
Width : 2500 mm
Height : 5600 mm
12/12 m3 25/25 m3
Length : 4100 mm Length : 4500 mm
Width : 3000 mm Width : 3500 mm
Height : 6100 mm Height : 8500 mm
Richard Alan Engineering Performance Products plc would be pleased to advise on /or tender for supply
Note
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specifi c purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
Customer reviews
No reviews were found for Integrated Tank Unit (ITU). Be the first to review!