Intercept - Model PV - Vertical Cartridge Dust Collectors
Intercept V-Series Vertical Cartridge Dust Collectors capture and remove most industrial and foundry dusts from exhaust system air. A unique CAM-LOC cartridge locking mechanism securely seals the cartridge header plate to the tube sheet to prevent dust bypass. A variety of system configurations are available to accommodate most space restrictions. Modules are available in one, two or three cartridge widths, and depths up to four cartridges.
The Continuous Cleaning-Process is designed to prolong the life of the cartridge filters. Each cartridge filter is cleaned by a high pressure pulse of airflow through the filter center. This 'pulse' of reverse airflow blows the collected dust off the outside of the filter cartridges and is collected in the hopper below. The pulse filter cleaning operation is pre-set to clean filters simultaneously while maintaining normal equipment operation. The On-Demand filter cleaning option is intended to save expensive plant air, the Photohelic Gage (provided as a standard feature) can be set to clean only when required by the level of collected contaminants. An After Hours Cleaning feature is an off-timer provided for continuous cartridge blowdown for up to ten minutes after the fan operation is shut off. This allows for smaller particulate to be removed from the system and avoids re-entrainment onto the media.
The Intercept design allows for access to the entire dirty air chamber through a single cartridge plenum access door. Filter change-out and chamber cleaning is accomplished without removing several doors or covers. Integral fans can be mounted to the machine on the top of the unit on the clean air side of the process. Exhaust fans are centrifugal,flat bladed and backward inclined for maximum efficiency and limit loading characteristics. All fans are mounted on a plug-in type motor and drive pedestal and are direct connected to the fan motor where possible so that unit performance can be tuned to exact system requirements. Exhaust fans can be supplied external to the dust collector on any size unit. Consult the factory for assistance with a selection best suited for the application.
- Continuous Pulse Filter Cleaning
- 10 Ga. Welded Sheet Steel construction
- CAM-LOC Cartridge Filter Positive Door Seal Design
- Pre-coated 300 sq. ft. cellulose paper cartridges.
- Removal efficiencies can reach 99.9% depending upon application.
- Welded couplings (1” NPT) for fire control equipment
- Photohelic Switch/Gage in a NEMA 12 (Dust Proof) Control Panel Enclosure
- Air Supply Line Valve and Filter
- Rotary Air Lock
- Special Cartridge Filters
- Service Platforms
- Sanding Processes
- Media Blasting
- Non-sparking Grinding and Deburring
- Wood Workiing