Gebr. Kemper GmbH + Co. KG

- Water Meter Line Stop Valve

From

0

Screw on, align, connect. Fast, precise, clean. The KEMPER combinations, mounting blocks and water meter box housings make the assembly of concealed valves and water meter housings so simple and expeditious. Especially at hard-to-access points. You finish the entire installation in just a few minutes and leave great results behind. And that's just fine for the customer. At the same time, the famous KEMPER quality provides additional safety – because the stop valve and the water meter housing are mode entirely of gunmetal.

  • Suitable for every installation situation Masonry, concealed and pre-wall installation
  • Perfectly aligned assembly through quick connection of water meters and stop units
  • Space-saving depth gauges of 90, 120, 130, and 153 mm
  • Variable depth
  • With hydrodynamic, stagnant-zone-free concealed valve, with maintenance-free stem seal
  • Optionally with multi-water meter housing G2“ coaxial based on model HWW or with manufacturer-specific water meter housing for installation of apartment water meters

  • Depth gauge only 120 mm
  • Water meter section made completely from only one casting (single-piece cast)
  • Available with manufacturer-specific or universal water meter housing
  • HWW Model with cast-on mounting feet

  • Depth gauge only 120 mm
  • Water meter section made completely from only one casting (single-piece cast)
  • Can be divided into two RG 120 MONO blocks
  • For time-saving, clean assembly, can be directly tiled
  • Pre-fitted mounting bracket makes it universal for masonry, concealed and pre-wall installation
  • Optimum thermal insulation through pressure-proof and tension-proof PU rigid foam
  • EnEV 2009 target values for heat losses are exceeded
  • Optimum sound insulation, moisture-repellent, building material class B2

  • Appropriate for tight spaces, e.g. when refurbishing
  • Depth gauge 153 mm compliant with tile raster
  • Mounting cap for concealed inspection cap installation
  • Other depth gauges on request
  • For individual cold or warm measurements
  • Universal for masonry, shaft, concealed and pre-wall installation

  • Universal for masonry, shaft, concealed and pre-wall installation
  • Completely mounted with DUO mounting foot for concealed, rail or wall attachment
  • Depth gauge 153 mm compliant with tile raster
  • With two integrated insulating shells, building material class B1, DIN 4102-4

  • Suitable for every pre-wall system through versatile attachment facilities and extensive accessories
  • Flexible in design through various KEMPER cover panels
  • Can be combined with commercially available inspection and covering systems, suitable for wireless design
  • Space-saving through small dimensions of the galvanised installation box (200 x 200 x 125 mm)
  • With insulating shell as accessory, building material class B1, DIN 4102-4
  • Depth gauge 88 mm

  • Valves and fittings made completely of gunmetal
  • Open, adjustable stainless steel bracket
  • Trouble-free installation and removal of the water meter through longitudinal distance spacer
  • Wall clearance adjustable from 92 - 132 mm
  • Sealable water meter fitting
  • Combination anti-pollution check valve with POM flow body and low opening pressure > 10 mbar
  • Various connection variants depending on the installation situation

Customer reviews

No reviews were found for Kemper - Water Meter Line Stop Valve. Be the first to review!