Only show results available in Virginia? Ok

accident regulation equipment

  • Model CEV - Centrifugal Flow Regulator

    There is a CEV flow regulator for any capacity between 0.2 l/s and 80 l/s – see diagram – designed for small and moderate volumes of storm water and certain types of industrial sewage. The capacity is infinitely adjustable by means of an adjustment plate in the inlet. In the mean position the inlet opening may be adjusted to ...

    By Mosbaek A/S based in Koege, DENMARK.

  • Premium

    Master Magnets - Fork Lift Magnets

    Master Magnets Ltd can now provide custom built forklift Stabilising Magnets. The magnets are designed to retain steel loads, holding them against the forks during lifting or transportation. In line with current health and safety regulations these magnets make a safer working environment avoiding accidents caused by loads falling off a forklift ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Freddy - Under Compression Valves

    FREDDY - your protection system against a vacuum The pressure balancing valve protects the containers or silos from a vacuum. The application of these valves is governed by the accident prevention regulations.

    By WAIWELDAI Anlagentechnik GmbH based in Grünsfeld, GERMANY. from Under Compression Valves Product line

  • Oskar - Over Compression Valves

    OSKAR - your protection system against overpressure. The pressure balancing valve protects containers or silos with pneumatic filling from overpressure. The application of these valves is governed by the accident prevention regulations.

    By WAIWELDAI Anlagentechnik GmbH based in Grünsfeld, GERMANY. from Over Compression Valves Product line

  • Training Network - Model 1866-DV - Pipeline Safety Orientation

    Employees are not the only ones effected by pipeline accidents -- it can be devastating to the environment. This video includes regulations and standards from a variety of government agencies (EPA, DOT, and OSHA) and provides an in-depth guide. Give your employees the safety knowledge they need with this memorable program!

    By The Training Network based in Durham, NORTH CAROLINA (USA).

  • Pipelife - Gas Stop Valves

    One of the most frequent causes for gas leaks is damage to service lines during the course of excavation work. Manipulations or imporper handling within the building - in the area up to the main shut-off valve or the pressure regulator - have also led to accidents.

    By Pipelife International GmbH based in Wien, AUSTRIA. from Gas Stop Valves Product line

  • Charly - Over & Under Compression Valves

    CHARLY - the protection system for your silo. The pressure balancing valve protects containers or silos with pneumatic filling from overpressure - but also from a vacuum caused during the discharging process. The application of these valves is governed by the accident prevention regulations.

    By WAIWELDAI Anlagentechnik GmbH based in Grünsfeld, GERMANY. from Over & Under Compression Valves Product line

  • Safety Cabinets

    A fire can charge through a building in no time. Injuring people, destroying assets, threatening the very existence of your business. What makes it all the more tragic is that simple proven steps can help reduce the risk of accidents.

    By Environmental Technologies of Alabama (ETA) based in Madison, ALABAMA (USA). from Safety Cabinets Product line


    Brady's SPC absorbents and spill containment products help you keep your employees and work environment safe from unexpected spills, leaks, drips or other accidents. SPC absorbents are available for cleaning up oil, water and chemical based spills. Select from traditional polypropylene or eco-friendly Re-Form™ absorbents and spill kits to help ...

    By LOMAR SUPPLY based in Parañaque City, PHILIPPINES.

  • Krušik - Double Wall Tanks

    Double wall tanks are developed in line with positive regulations in ecology and protection of the environment. Inner tank is intended for storage of liquids while the outer one is intended for intake and it is supposed to, in case of an accident with the main tank, take in the liquid so as to prevent endangering human health and the environment. ...

    By Krušik-plastika ad Osecina based in Osecina, SERBIA. from Double Wall Tanks Product line

  • Niubo - Model Demon - Sprayers

    Mounted sprayer with Annovi Reverberi pump high pressure membranes. Manual pressure regulator. Reinforced chassis made in curved tube. Chassis coated with anticorrosion polyester painting baked. Polyethylene main tank, system washing kit and handwashing kit tanks. Hinged lid filling filter. Suction filter with valve. 2 guns. 20 mt hosepipes. ...

    By Niubo Maquinaria Agricola based in Torregrossa (Lérida), SPAIN. from Sprayers Product line

  • Air Traffic Measuring System

    Wind shear is a sudden shift in wind direction and speed that disturbs air traffic. It’s a condition that has caused many serious accidents with over 500 fatalities during the past 20 years. To help prevent this, AQSystem offers solutions that are able to spot and predict when wind shear will occur.

    By AQSystem Stockholm AB based in Tyresö, SWEDEN.

  • Arc Flash Safety Compliance

    Arc flash is a short circuit through air that flashes over from one exposed live conductor to another conductor or to ground. Arc flash incidents are costly and the frequency of reported accidents is increasing - making arc flash issues a very hot topic within OSHA and the overall safety industry.

    By Brady Corporation based in Milwaukee, WISCONSIN (USA).

  • Exposed Shower Head Recessed Emergency Shower Unit

    Recessed emergency shower with ceiling mounted exposed shower head. Recessed shower conserves valuable floor space, while eliminating the clutter and obstruction created by conventional shower equipment. Unit can be installed in either a corridor or a lab room, close to where accidents might occur.

    By Guardian Equipment based in Chicago, ILLINOIS (USA). from Exposed Shower Head Recessed Emergency Shower Unit Product line

  • Safetread Anti-Slip Stair Covers, Anti-Slip Stair Nosing & Anti-Slip Floor Sheets

    The slip problem 33% of all reportable major injuries are due to slips and trips. 20% of 'over 3 day' injuries to employees are due to slips and trips. 50% of all reported accidents to members of the public are due to slips and trips.The anti-slip solution


    The Risk Management Plan (RMP) is intended to prevent serious chemical accidents that could harm staff and public health and the environment and to reduce the potential impact of accidental releases. A facility is required to submit an RMP if it stores or uses a chemical in quantities greater than their threshold amounts as defined by the EPA.

    By Argent Consulting Services, Inc. based in Houston, TEXAS (USA). from RMP/PSM Product line

  • Beringer - Model 750 - 1250 mm - RoRo Container - Smoothline Construction - Standard Type

    Manufactured according to DIN 30 722. Convex side panels. Bottom (4 mm), sidewalls, front and doors (3 mm) made of S 460 MC. Hook ø 60 mm. Sub frame made of IPN 180. Double twin door with middle lock. Rollers with grease nipples ø 160 mm. Set of net hooks welded all around. Ladder at front side (optional). Additional lock for safety ...

  • IMR - Model FA2.5H - Core Blower Machine

    This machine is used for the production of small/medium size cores with the HOT BOX system. The machine has been studied and built for a blowing capacity of 2.5 litres. The machine is suplied with accident-prevention doors with safety switches and is equipped with an overhead fume-suction hood. The various production cycle phases (automatic or ...

    By IMR E&T S.r.l based in Romans d`Isonzo, ITALY. from Core Blower Machine Product line

  • UV DOAS Open Path For Fenceline and Ambient Monitoring

    An ideal monitoring system should be configured as a barrier placed in proximity of the industrial perimeter (fence-line), able to embrace all plants at risk of accidents or leaks, and capable of detecting a wide range of gaseous compounds. At present the technique that is closest to the ideal solution is represented by area monitoring systems ...

  • Medical Waste Handling

    Medical waste in health facilities have electronic weighing of vehicles to determine the amount of medical wastes.In addition, medical waste, the collection of health facilities and medical waste transportation vehicle used for the three units.These tools are prepared in accordance with the regulation. Characteristics of waste was completely ...

    By Kent Environment based in Malatya, TURKEY. from Medical Waste Handling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you