Acid Waste Equipment
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Enfield electrofusion fittings are molded with an integral resistance wire in the socket, with jointing completed by energizing the resistance wire via a microprocessor controlled Enfusion Control Unit. The result of these innovations is an unparalleled level of joint reliability and repeatability. Enfield has proven over time that it produces the optimum level of performance where it matters ...
-
Manufactured by Burt Process Equipment, Inc. (BPE)based in USA
Our Assured Compliance System (ACS) is a prepackaged, skid mounted pH adjustment system, designed for use as a wastewater treatment process. This pH neutralization system uses our proprietary “hybrid batch technology” to treat continuous flow streams. High efficiency proportional metering pumps, multi-chamber treatment tank, passive equalization chamber, wet-tap with self-cleaning pH ...
-
Manufactured by Digital Analysis Corp.based in USA
pHASE pH Adjustment systems are designed to handle a variety of acidic and alkaline waste streams including concentrated discharges. Any acidic or alkaline stream, of any concentration from any source can be safely and effectively neutralized with a pHASE pH Adjustment system. These are batch pH Adjust systems that handle continuous flows ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature ...
-
Manufactured by Neutra Kunststoffbau GmbHbased in GERMANY
The purpose of a waste air absorption unit is to remove contaminants from the fumes arising in surface finishing processes. Neutra‘s absorption units comply with statutory threshold values for exhaust emissions, thus reducing air pollution while protecting the environment for the future. Its absorption systems are designed in ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
At the heart of our patented Encase polypro system is its electrofusion fitting with a groundbreaking heavy-gauge resistance wire molded into the socket. The result is a premier system that offers considerable reduction of installation time and the highest quality bubble-tight joints ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Labline (Mechanical Joint) has displaced the more expensive and difficult to install glass and metal systems. Gone is the need for fusing, caulking or welding of joints. Joining of the Labline System is complete in just 30 seconds and once the nut is locked into place, the end-user is assured of many years of trouble-free service. Yet, because it is a mechanical joint, the system can be easily ...
-
Manufactured by Aetna Plastics Corp.based in USA
LabWaste CPVC Corrosive Waste Drainage System is a complete system of pipe, fittings & adapters specifically designed for waste chemical use. One of the key advantages of this system is its excellent resistance to a broad range of corrosive environments. CPVC is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, and ...
-
Manufactured by Aetna Plastics Corp.based in USA
We are pleased to offer the FLUOR-O-FLO™ XP Clamp Joint Piping System. This is an ideal solution to drainage and other low pressure systems for difficult-to-handle fluids, providing safety, flexibility and extreme corrosion ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Acid mist exhaust gas treatment scrubber is also known as acid mist exhaust gas treatment tower, acid mist exhaust gas absorption tower, wet scrubber. Acid mist exhaust gas treatment scrubber is a kind of waste gas purification and treatment environmental protection equipment, mainly used for sulfuric ...
-
Manufactured by Jiangxi Mingxin Metallurgy Equipment Co., Ltdbased in CHINA
The waste lead-acid battery management system is developed by our company,through crushing and separation of cell sorting out, paste, metal grid, heavy plasticetc. The battery by grab bucket for feeding into the crushing system, the crushed material into the water power sorting system, the principle of different densities of the isolated ...
-
Manufactured by Jiangxi Mingxin Metallurgy Equipment Co., Ltdbased in CHINA
Battery recycling plant is based on the advanced and reasonable mechanism process that can separate the LEAD and plastic from lead-acid battery. The purity of lead can get 97%. This process is an ECO-friendly method instead of pollution way that is based on burning and chemical processing. ...
-
Distributed by Harrington Industrial Plasticsbased in USA
The Enfield Socket Fusion System consists of flame-retardant polypropylene pipe, fittings, traps and accessories necessary for the drainage of laboratory and industrial waste chemicals. It can also be used in conjunction with Labline and Plenumline Mechanical Joint Systems and the Encase Double Containment ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX Plenumline is a robust acid waste system made from flame-retardant Polyvinylidene Fluoride ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
pH monitoring, recording, and alarm system. Neutrasystem 2 ensures that discharges into the sewer are maintained within acceptable pH parameters by neutralizing the acidic waste with limestone ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Polypropylene floor drains (available in Adjustable and ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Neutratank offers a complete range of neutralization tanks as well as dilution, sampling and pH ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Labline (Mechanical Joint) has displaced the more expensive and difficult to install glass and metal ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Enfield™ electrofusion fittings have revolutionized the industry, delivering unparalleled reliability in acid waste ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
For efficiently managing chemical spills, our FlowayTM adjustable and non-adjustable polypropylene drain ports are specially designed to feed into IPEX acid waste ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you